Join WhatsApp Icon JEE WhatsApp Group

NTA JEE Mains 8th April 2024 Shift 2 - Physics

For the following questions answer them individually

A given object takes n times the time to slide down $$45°$$ rough inclined plane as it takes the time to slide down an identical perfectly smooth $$45°$$ inclined plane. The coefficient of kinetic friction between the object and the surface of inclined plane is :

A thin circular disc of mass $$M$$ and radius $$R$$ is rotating in a horizontal plane about an axis passing through its centre and perpendicular to its plane with angular velocity $$\omega$$. If another disc of same dimensions but of mass $$M/2$$ is placed gently on the first disc co-axially, then the new angular velocity of the system is :

Given below are two statements : Statement (I) : The mean free path of gas molecules is inversely proportional to square of molecular diameter. Statement (II) : Average kinetic energy of gas molecules is directly proportional to absolute temperature of gas. In the light of the above statements, choose the correct answer from the options given below :

A capacitor has air as dielectric medium and two conducting plates of area $$12 \text{ cm}^2$$ and they are $$0.6$$ cm apart. When a slab of dielectric having area $$12 \text{ cm}^2$$ and $$0.6$$ cm thickness is inserted between the plates, one of the conducting plates has to be moved by $$0.2$$ cm to keep the capacitance same as in previous case. The dielectric constant of the slab is : (Given $$\epsilon_0 = 8.834 \times 10^{-12}$$ F/m)

Water boils in an electric kettle in 20 minutes after being switched on. Using the same main supply, the length of the heating element should be _____ to _____ times of its initial length if the water is to be boiled in 15 minutes.

Least count of a vernier caliper is $$\frac{1}{20N}$$ cm. The value of one division on the main scale is 1 mm. Then the number of divisions of main scale that coincide with N divisions of vernier scale is :

There are 100 divisions on the circular scale of a screw gauge of pitch 1 mm. With no measuring quantity in between the jaws, the zero of the circular scale lies 5 divisions below the reference line. The diameter of a wire is then measured using this screw gauge. It is found that 4 linear scale divisions are clearly visible while 60 divisions on circular scale coincide with the reference line. The diameter of the wire is :

A body of mass $$M$$ thrown horizontally with velocity $$v$$ from the top of the tower of height $$H$$ touches the ground at a distance of 100 m from the foot of the tower. A body of mass $$2M$$ thrown at a velocity $$\frac{v}{2}$$ from the top of the tower of height $$4H$$ will touch the ground at a distance of _____ m.

Backspace
789
456
123
0.-
Clear All

A circular table is rotating with an angular velocity of $$\omega$$ rad/s about its axis (see figure). There is a smooth groove along a radial direction on the table. A steel ball is gently placed at a distance of 1 m on the groove. All the surfaces are smooth. If the radius of the table is 3 m, the radial velocity of the ball w.r.t. the table at the time ball leaves the table is $$x\sqrt{2}\omega$$ m/s, where the value of $$x$$ is _____

page4_img1
Backspace
789
456
123
0.-
Clear All

An object of mass 0.2 kg executes simple harmonic motion along x axis with frequency of $$\left(\frac{25}{\pi}\right)$$ Hz. At the position $$x = 0.04$$ m the object has kinetic energy 0.5 J and potential energy 0.4 J. The amplitude of oscillation is _____ cm.

Backspace
789
456
123
0.-
Clear All

A heater is designed to operate with a power of 1000 W in a 100 V line. It is connected in combination with a resistance of $$10\Omega$$ and a resistance $$R$$, to a 100 V mains as shown in figure. For the heater to operate at 62.5 W, the value of $$R$$ should be _____ $$\Omega$$

page4_img3
Backspace
789
456
123
0.-
Clear All

The coercivity of a magnet is $$5 \times 10^3$$ A/m. The amount of current required to be passed in a solenoid of length 30 cm and the number of turns 150, so that the magnet gets demagnetised when inside the solenoid is _____ A.

Backspace
789
456
123
0.-
Clear All

Two slits are 1 mm apart and the screen is located 1 m away from the slits. A light of wavelength 500 nm is used. The width of each slit to obtain 10 maxima of the double slit pattern within the central maximum of the single slit pattern is _____ $$\times 10^{-4}$$ m.

Backspace
789
456
123
0.-
Clear All

A potential divider circuit is connected with a dc source of 20 V, a light emitting diode of glow in voltage 1.8 V and a zener diode of breakdown voltage of 3.2 V. The length (PR) of the resistive wire is 20 cm. The minimum length of PQ to just glow the LED is _____ cm

page5_img1
Backspace
789
456
123
0.-
Clear All