SSC JE Civil Engineering 2013

Download PDF

In the following questions, seleet the related figure/letters/number from the given alternatives.

Cracku Banner

In the following questions, select the one which different from the other three responses.

For the following questions answer them individually
SSC JE Civil Engineering 2013 - Question 21

Number of letters skipped in between adjacent letters in the series increases by one. Which of the following series observes the rule given below?

SSC JE Civil Engineering 2013 - Question 22

In the following words, the group of letters should not contain more than three vowels. Which of the following words does not conform to the rule?

In the following questions, choose the correct alternative from the given responses that will complete the series.

For the following questions answer them individually
SSC JE Civil Engineering 2013 - Question 27

My father haa two brothers. The youngest has two sons and one daughter. The elder one has one son and two daughters and the remaining one has three sons. If my father has four nephews, how many cousins (brothers) have I got ?

SSC JE Civil Engineering 2013 - Question 29

A car covers the first half. of the distance between two places at 40 km/hr and the second half of the distance at 60 km/hr. So what is the average speed of the car?

SSC JE Civil Engineering 2013 - Question 30

In a certain code language, TOGETHER is written as EGTORETH. How is CONGRATULATE written in that language ?

SSC JE Civil Engineering 2013 - Question 32

Some equations are solved on the basis of a certain system. On the same basis, find out the correct answer for the unsolved equation. If $$4^2 = 7$$, $$5^2 = 7$$, $$6^2 = 9$$, then $$7^2 = ?$$

In the following questions, find the missing number from the given responses.

For the following questions answer them individually
SSC JE Civil Engineering 2013 - Question 38

Ram travelled 6 ft towards West, he turned left and walked 8 ft, then turned left and walked 4 ft, then turned left and walked 8 ft again. How far is he now from the starting point ?

SSC JE Civil Engineering 2013 - Question 40

The door of Priya’s house faces East. From the back side of the house, she walks straight 50 meters, then turns to the right and walks 50 meters again. Finally, she turns towards the left and stops afler walking 25 meters. Now Priya is facing which direction ?

SSC JE Civil Engineering 2013 - Question 41

In the following diagram, rectangle represents males, circle represents urban and square represents educated. Which region represents educated urban males?

Cracku Banner

In the following questions, one or two statements are given, followed by two conclusions I and II. You have to consider the statements to be true even if they seem to be at variance from commonly known facts, You have to decide which of the given conclusions, if any, follows from the given statements.

SSC JE Civil Engineering 2013 - Question 44

Statement :
A social movement is an interaction of people with a common motivational base in frustration.

Conclusions :
I. In a social movement, people who are satisfied interact with frustrated people.
II. Frustrated people interact with each other in a social movement.

SSC JE Civil Engineering 2013 - Question 45

Statements:
All scientists are hard-working. No hard-working man is poor.

Conclusions:
I. No scientist is poor
II. No poor man is a scientist.

For the following questions answer them individually
SSC JE Civil Engineering 2013 - Question 47

A word is represented by only one set of numbers as given in any one of the alternatives. The sets of numbers given in the alternatives are represented by two classes of alphabets as in the two matrices given below. The columns and rows of Matrix I are numbered from 0 to 4 and that of Matrix II are numbered from 5 to 9. A letter from these matrices can be represented first by its row and next by its column, eg. ‘A’ can be represented by 13, 76, etc., and ‘G’ can be represented by 22, 65, etc. Similarly, you have ta identify the set for the word ‘PUBLIC’.

SSC JE Civil Engineering 2013 - Question 50

A piece of paper is folded and punched as shown below in the question figure. From the given answer figures, indicate how it will appear when opened ?

Screenshot_14
SSC JE Civil Engineering 2013 - Question 51

Who was the first economist to have coined the terms “Micro Economics” and "Macro Economics" ?

SSC JE Civil Engineering 2013 - Question 53

The main reabon for the high growth of money supply im India since 1970 has been the rise in

SSC JE Civil Engineering 2013 - Question 59

A civil servant in India may exercise poliliberty by

SSC JE Civil Engineering 2013 - Question 67

Migratory larvae of Ascaris produce symptoms of pneumonia. This is known as

Cracku Banner
SSC JE Civil Engineering 2013 - Question 84

The advantages of rain-water harvesting is that it

SSC JE Civil Engineering 2013 - Question 89

In India, the day $$5^{th}$$ September is celebrated as Teacher's Day to honour the birthday of

SSC JE Civil Engineering 2013 - Question 100

Which one of the following compounds is formed when formaldehyde is treated with Grignard reagent ?

SSC JE Civil Engineering 2013 - Question 101

The lintels are preferred to arches because

SSC JE Civil Engineering 2013 - Question 106

Which of the following cements is suitable for use in urgent repairs of existing massive concrete structures such as large dams?

SSC JE Civil Engineering 2013 - Question 108

For 15 mm thick cement plastering 1 : 6 on 100 sq. m new brick work, quantity of cement required is

SSC JE Civil Engineering 2013 - Question 115

If ‘i’ is the rate of interest expressed in decimal and ‘n’ is the number of years, then coefficient of annual find $$I_{c}$$ is

SSC JE Civil Engineering 2013 - Question 116

The above figure represents plan and section of an excavation layout. The volume of earthwork in excavation of foundation trench is

SSC JE Civil Engineering 2013 - Question 118

A level line is a

SSC JE Civil Engineering 2013 - Question 119

Ranging is defined as

SSC JE Civil Engineering 2013 - Question 120

Compute the angle between the lines AB and AC, If their respective bearings are $$52^\circ 30' and 328^\circ 45'$$.

Cracku Banner
SSC JE Civil Engineering 2013 - Question 121

The Whole circle Bearing of a line is $$287^\circ 15'$$. The Reduced Bearing of the lime is

SSC JE Civil Engineering 2013 - Question 125

‘Offsets’ are

SSC JE Civil Engineering 2013 - Question 126

The fore bearings of the lines AB and BC are $$40^\circ and 120^\circ$$ respectively. The included angle between AB and BC is

SSC JE Civil Engineering 2013 - Question 127

If the sum of northing of a traverse exceeds the sum of southing by 1 m and sum of easting exceeds the sum of westings by 1 m, the resultant closing error and its true
bearing are respectively

SSC JE Civil Engineering 2013 - Question 128

If in a closed traverse, the sum of the north latitudes is more than the sum of the south latitudes and also the sum of west departures is more than the sum of east departures,
the bearing of thew closing line is in the

SSC JE Civil Engineering 2013 - Question 129

A 300 mm square bearing plate settles by 15 mm in a plate load test on a cohesive soil when the intensity of loading is 0.2 N/mm2 . The settlement of a prototype shallow footing 1 m square under the same intensity of loading is

SSC JE Civil Engineering 2013 - Question 130

The specific speed for a turbine has the dimensions of

SSC JE Civil Engineering 2013 - Question 132

A shallow foundation is defined as a foundation which

SSC JE Civil Engineering 2013 - Question 133

If the volume of voids is equal to the volume of solids in a soil mass, then the values of porosity and voids ratio respectively are

SSC JE Civil Engineering 2013 - Question 135

In open channel flows, the characteristic length commonly used in defining the Reynolds number is the

SSC JE Civil Engineering 2013 - Question 136

Bulk modulus of a fluid is the ratio of

SSC JE Civil Engineering 2013 - Question 137

The buoyancy depends upon the

SSC JE Civil Engineering 2013 - Question 138

The discharge over a rectangular notch is

SSC JE Civil Engineering 2013 - Question 139

The most economical section of a rectangular channel is one having hydraulic radius equal to

SSC JE Civil Engineering 2013 - Question 143

In a two-dimensional flow fluid, if a velocity potential function $$\phi$$ exists which satisfies the relation $$\frac{\partial^{2} \phi}{\partial x^{2}}+\frac{\partial^{2} \phi}{\partial y^{2}}$$=0 then the flow is

SSC JE Civil Engineering 2013 - Question 146

The populations of a town as per census records were 200000, 210000 and 230000 for the years 1981, 1991 and 2001 respectively. The population of the town as per geometric mean method in the year 2009 is

SSC JE Civil Engineering 2013 - Question 147

If the stopping distance and average length of a vehicle are 18 m and 6 m respectively, then the theoretical maximum capacity (vehicles per hour) of a traffic lane at a speed of
10 m/sec is

SSC JE Civil Engineering 2013 - Question 148

In highway construction on superelevated curves, the rolling shall proceed from

SSC JE Civil Engineering 2013 - Question 150

Which one of the following sequences is the most suitable for treating raw durface water to make it suitable for drinking purpose?

SSC JE Civil Engineering 2013 - Question 152

A beam fixed at both ends carries a uniformly distributed load on entire length. The ration of bending moment at the support to the bending moment at mid span is given by

SSC JE Civil Engineering 2013 - Question 153

In case of biaxial stress, the maximum value of shear stress is given by

SSC JE Civil Engineering 2013 - Question 154

From a circular plate of diameter 6.0 cm, a circle out whose diameter is a darius of the plate. The distance of centre of gravity of the remainder from the centre of circular plate is

SSC JE Civil Engineering 2013 - Question 157

A concentrated load W acts at the centre of a simply supported beam of length L. If the load is changed to a uniformly distributed load over the entire span, then the ratio of maximum deflection under concentrated load and under uniformly distributed load will be

SSC JE Civil Engineering 2013 - Question 159

Deflection of the free end of a cantilever beam having a concentrated load W at mid span is given by

Cracku Banner
SSC JE Civil Engineering 2013 - Question 160

Of the several prismatic beams of equal lengths and of same material, the beam that can carry maximum load in flexure is the one having maximum

SSC JE Civil Engineering 2013 - Question 161

The maximum deflection of a simply supported beam of effective span L and subjected to a central concentrated load W is given by

SSC JE Civil Engineering 2013 - Question 162

In a Mohr’s circle of $$\sigma -\tau$$ plane $$(\sigma = normal stress, \tau =shear stress)$$, the vertical diameter represents

SSC JE Civil Engineering 2013 - Question 163

A singly supported beam is carrying distributed load of ‘zero’ intensity over one support to linearly varying nature of intensity ‘w’ over the other support. The shape of BMD will be

SSC JE Civil Engineering 2013 - Question 164

The maximum dimension of a core section for a trctangular cross-section under eccentric loading on a column $$(b \times d)$$ is

SSC JE Civil Engineering 2013 - Question 166

Two identical simply supported beams of span ‘l’ are subjected to equal load ‘W’. One beam id carrying the load ‘W’ at its centre (as carrying it in the form of u.d.l. over the entire span. The ratio of their mid-span bending moment will be

SSC JE Civil Engineering 2013 - Question 167

Angle of twist of a circular shaft under the action of a torsional moment T is given by

SSC JE Civil Engineering 2013 - Question 169

The curvature at any point $$\frac{1}{R}$$ along the curve representing the deformed shape of a beam is given by

SSC JE Civil Engineering 2013 - Question 170

The moment required to rotate the near and end of a prismatic beam through unit angle, without translation, the far end being fixed is

SSC JE Civil Engineering 2013 - Question 171

A retaining wall of trapezoidal section having base which ‘b’ retains earth at its back. For no tension to be developed at base, the resultant force will intersect the base from
centre line of the line, within a distance of

SSC JE Civil Engineering 2013 - Question 173

The equivalent stiffness of two springs of stiffness $$S_{1} and S_{2}$$ joined in sereies is given by S =

SSC JE Civil Engineering 2013 - Question 174

Buckling load for an axially loaded column with both ends fixed is given by

SSC JE Civil Engineering 2013 - Question 175

Poisson’s ratio $$\mu$$ is defined as the ratio of

SSC JE Civil Engineering 2013 - Question 177

The grade of concrete M 20 means that characteristic compressive strength of 15 cm cubes after 28 days is given by

SSC JE Civil Engineering 2013 - Question 178

You are asked to construct a massive concrete dam. The type of cement you will use is

SSC JE Civil Engineering 2013 - Question 179

The object of curing is not to

SSC JE Civil Engineering 2013 - Question 181

High percentage of C3S and low percentage of C2S in a cement will result in
(i) rapid hardening
(ii) high early strength with high heat generation
(iii)more resistance to chemical attact
The correct answer is

SSC JE Civil Engineering 2013 - Question 182

As per IS 456, splitting tensile-strength $$(f_{cr})$$ of concrete may be estimated from compressive stength as

SSC JE Civil Engineering 2013 - Question 185

The minimum horizontal distance between two main reinforcement bars shouls be

SSC JE Civil Engineering 2013 - Question 186

During the manufacture of Portland cement, gypsum or Plaster of Paris is added to

SSC JE Civil Engineering 2013 - Question 188

As per IS 456, the effective length cantilever shall be taken as

SSC JE Civil Engineering 2013 - Question 189

If the modular ratio is ‘m’, stress ratio in steel and concrete is ‘r’, then the critical neutral axis constant ‘k’ is given by

SSC JE Civil Engineering 2013 - Question 190

For two way action, i.e. punching shear, the calculated shear stress, $$\tau_{y}$$ , should satisfy the following relation $$\tau_{y} \leq K_{s}\tau_{c} $$
where $$\tau_{c}$$ according to working stress method is expressed as

SSC JE Civil Engineering 2013 - Question 191

Diagonal tension in a reinforced concrete beam

SSC JE Civil Engineering 2013 - Question 192

In a singly reinforced beam, if the permissible stress in concrete reaches earlier than the permissible stress in steel the beam section is called

SSC JE Civil Engineering 2013 - Question 193

If $$\sigma_ {s}$$ is the stress in bar and $$\tau_{bd}$$ is the design bond stress, then the development length of a bar of diameter \phi is given by

SSC JE Civil Engineering 2013 - Question 196

The minimum edge and end distance from the centre of any hole to the nearest flame cut edge shall not be less than

SSC JE Civil Engineering 2013 - Question 198

For simply supported beam, the allowable deflection shall not exceed

Cracku Banner
SSC JE Civil Engineering 2013 - Question 200

.Maxmimum size of a fillet weld for a plate of square edge is

Join CAT 2026 course by 5-Time CAT 100%iler

Start your IIM journey with the right preparation and crack CAT 2026.

Enroll Now