SSC JE Civil Engineering 29th Jan 2018 Shift-2

Download PDF
For the following questions answer them individually
Cracku Banner
SSC JE Civil Engineering 29th Jan 2018 Shift-2 - Question 38

A hawker starts from his home. He pushes his cart 2 km North, then he turns West and walks 3 km, then he turns South and walks 7 km, then he turns to his left and walks 3 km. Where is he with respect to his home?

SSC JE Civil Engineering 29th Jan 2018 Shift-2 - Question 39

Rahul and Shyam start cycling from their club. Rahul rides 11 km South, then turns to his left and rides 15 km. In the meanwhile Shyam rides 7 km East, then turns South and rides 17 km, then turns to his left and rides 8 km. Where is Shyam with respect to Rahul?

SSC JE Civil Engineering 29th Jan 2018 Shift-2 - Question 40

In the question two statements are given, followed by two conclusions, I and II. You have to consider the statements to be true even if it seems to be at variance from commonly known facts. You have to decide which of the given conclusions, if any, follows from the given statements.
Statement I: Some gas is air
Statement II: Some nitrogen is gas

Conclusion I: Some nitrogen is air
Conclusion II: All gas is nitrogen

SSC JE Civil Engineering 29th Jan 2018 Shift-2 - Question 41

In the question three statements are given, followed by three conclusions, I, II and III. You have to consider the statements to be true even if it seems to be at variance from commonly known facts. You have to decide which of the given conclusions, if any, follows from the given  Statements.
Statement I: No marble is granite
Statement II: All stones are marble
Statement III: Some rocks are stones

Conclusion I: Some rocks are granite
Conclusion II: Some marble are rocks
Conclusion III: No stones are granite

Cracku Banner
SSC JE Civil Engineering 29th Jan 2018 Shift-2 - Question 44

In the following figure, square represents Philosophers, triangle represents Police Officer, circle represents Pharmacists and rectangle represents Americans. Which set of letters represents Pharmacists who are not police officers ?

SSC JE Civil Engineering 29th Jan 2018 Shift-2 - Question 50

A word is represented by only one set of numbers as given in any one of the alternatives. The sets of numbers given in the alternatives are represented by two classes of alphabets as shown in the given two matrices. The columns and rows of Matrix-I are numbered from 0 to 4 and that of Matrix-II are numbered from 5 to 9. A letter from these matrices can be represented first by its row and next by its column, for example 'C' can be represented by 43, 14 etc and 'Q' can be represented by 89, 65 etc, Similarly, you have to identify the set for the word 'YANK'.

SSC JE Civil Engineering 29th Jan 2018 Shift-2 - Question 53

Which of the following statements is correct?

SSC JE Civil Engineering 29th Jan 2018 Shift-2 - Question 62

The President of India can dissolve the Lok Sabha before completion of term
________.

Cracku Banner
SSC JE Civil Engineering 29th Jan 2018 Shift-2 - Question 82

Which of the following statement(s) is/are CORRECT with respect to BIOS?
I. It is a set of computer instructions in firmware.
II. It controls input and output operations.
III. Full form of BIOS is basic input-output system.

SSC JE Civil Engineering 29th Jan 2018 Shift-2 - Question 89

What precaution should be taken to avoid the overloading of domestic electric
circuits?

SSC JE Civil Engineering 29th Jan 2018 Shift-2 - Question 111

Which of the following is correct statement for the cubical content methods?

Cracku Banner
SSC JE Civil Engineering 29th Jan 2018 Shift-2 - Question 124

Determine the normal pull (kg) for a tape of 20 m long standardized at a pull of 30 kg. The cross section area of the tape is 0.5 square centimetres, weight of the tape per metre is 20 gm. Take modulus of the elasticity for tape material as 21,00,000 kg per square centimetre.

SSC JE Civil Engineering 29th Jan 2018 Shift-2 - Question 125

Which of the following expression is used for calculation of R.L of a point?

SSC JE Civil Engineering 29th Jan 2018 Shift-2 - Question 131

10 m thick confines aquifer gives the steady state discharge of 0.03 $$\frac{m^{3}}{s}$$ through the well of 50 cm radius. Due to pumping, the height of the water in the well is dropped frpm 15 m to 10 m and the radius of influence is obtained as 500 m. What is the coefficient of permeability $$(\frac{mm}{s})$$ ?

SSC JE Civil Engineering 29th Jan 2018 Shift-2 - Question 138

Water is transported on a level road in the cylindrical container of diameter 0.5 m and height 0.8 m. The maximum acceleration of vehicle is 5 $$\frac{m}{s^{2}}$$. What is the initial allowable height of water (cm) in the tank, if there is no spill ?

SSC JE Civil Engineering 29th Jan 2018 Shift-2 - Question 139

For a flow, the velocity field and variation in density is given as, $$\bar{V}=(10X+3Y+2Z)\hat{i}+(12X+4Y+5Z)\hat{j}+(8X+7Y+\lambda Z)\hat{k}$$ and $$\rho = \rho_0 e^{-3t}$$ respectively. What is the value of $$\lambda$$, if the mass is conserved ?

SSC JE Civil Engineering 29th Jan 2018 Shift-2 - Question 140

A circular pipe of diameter 0.5 m carries the discharge of 50 litres/s. The head loss due to friction in pipe is 0.15 m and friction factor for the pipe is given as 0.01. What is the length (m) of pipe?

SSC JE Civil Engineering 29th Jan 2018 Shift-2 - Question 141

A siphon is used at point A to draw the water from large reservoir and discharge it to the point B at an atmospheric pressure. If the elevation difference of points A and B is 10 m, what is the velocity (m/s) at point B?

SSC JE Civil Engineering 29th Jan 2018 Shift-2 - Question 142

If the two exactly same pumps are running at the same speed and lift the water at the head of 20 m and 30 m respectively. What is the diameter of impeller of second pump if the diameter (mm) of impeller of first pump is 500 mm?

SSC JE Civil Engineering 29th Jan 2018 Shift-2 - Question 151

Efficiency of a riveted joint us defined as the ratio of

SSC JE Civil Engineering 29th Jan 2018 Shift-2 - Question 152

The critical load for a column of length l hinged at both ends and having flexural rigidity EI, is given by

Cracku Banner
SSC JE Civil Engineering 29th Jan 2018 Shift-2 - Question 160

Rise of a Jack arch is kept about

SSC JE Civil Engineering 29th Jan 2018 Shift-2 - Question 162

Pick up the correct statement from the following:

SSC JE Civil Engineering 29th Jan 2018 Shift-2 - Question 173

Pick up the correct statement from the following

SSC JE Civil Engineering 29th Jan 2018 Shift-2 - Question 176

Pick up the correct statement from the following: Drying shrinkage is affected by

SSC JE Civil Engineering 29th Jan 2018 Shift-2 - Question 178

Deleterious substances in aggregate are undesirable because they may:

SSC JE Civil Engineering 29th Jan 2018 Shift-2 - Question 180

According to the steel beam theory of doubly reinforced beams

SSC JE Civil Engineering 29th Jan 2018 Shift-2 - Question 182

The stresses developed in concrete and steel in reinforced concrete beam 25 cm width and 70 cm effective depth are 62.5 $$\frac{kg}{cm^{2}}$$ and 250 $$\frac{kg}{cm^{2}}$$ respectively. If m= 15, the depth of its neutral axis is

SSC JE Civil Engineering 29th Jan 2018 Shift-2 - Question 184

If the maximum bending moment of a simply supported slab is M Kg.cm the effective depth of the slab is: (It is given that Q is M.R. factor)

SSC JE Civil Engineering 29th Jan 2018 Shift-2 - Question 189

The ratio of the length and depth of a simply supported rectangular beam which experiences maximum bending stress equal to tensile stress due to same load at its mid span is

SSC JE Civil Engineering 29th Jan 2018 Shift-2 - Question 190

The maximum deflection of a simply supported beam of span L carrying an isolated load at the center of the span, flexural rigidity being EI is

SSC JE Civil Engineering 29th Jan 2018 Shift-2 - Question 191

A steel plate d x b is sandwiched rigidly between two timber joists each D x B/2 in section. The moment of resistance of the beam for the same maximum permissible stress σ in timber and steel will be: Where Young’s modulus of steel is m times that of the timber

SSC JE Civil Engineering 29th Jan 2018 Shift-2 - Question 195

If D and d are external and internal diameters of a circular shaft respectively, its polar moment of inertia is

SSC JE Civil Engineering 29th Jan 2018 Shift-2 - Question 196

Pick up the correct statement from the following

SSC JE Civil Engineering 29th Jan 2018 Shift-2 - Question 198

A two hinged parabolic arch of span l and rise h carries a load varying from zero at the left end to w per unit run at the right end. The horizontal thrust is

Cracku Banner
SSC JE Civil Engineering 29th Jan 2018 Shift-2 - Question 199

The maximum Bending Moment due to an isolated load in a three-hinged parabolic arch (span l, rise h) having one of its hinges at the crown, occurs on either side of the crown at a distance

Join CAT 2026 course by 5-Time CAT 100%iler

Start your IIM journey with the right preparation and crack CAT 2026.

Enroll Now