[Download PDF] SSC JE Mechanical Engineering 2012 Paper with Solutions

SSC JE Mechanical Engineering 2012 - Question 1

How many white cubes are there in the given structure?

SSC JE Mechanical Engineering 2012 - Question 2

In the following Venn diagram, identify the number which denotes Doctors who know both Swimming and Dancing.

SSC JE Mechanical Engineering 2012 - Question 3

Which one of the following diagramsbest depicts the relationship among College Graduates, Professional Athletes and Great Scientists?

SSC JE Mechanical Engineering 2012 - Question 4

Statements:
Mind is a stream of thoughts.
Mind is working all the time.
Conclusions:
I: If there is no thought, there is no mind.
II: Thoughtless people will not succeed.

SSC JE Mechanical Engineering 2012 - Question 5

Statements:
Teachers should have empathy.
Students need empathetic approach from their teachers.

Conclusions:
I: Persons without empathy cannot become good teachers.
II: Good teachers understand the problems of their students.

SSC JE Mechanical Engineering 2012 - Question 6

Which answer figure will complete the pattern in the question figure?

SSC JE Mechanical Engineering 2012 - Question 7

Select the answer figure in which the question figure is hidden/embedded.

SSC JE Mechanical Engineering 2012 - Question 8

A piece of paper is folded and punched as shown below in the question figures. From the given answer figures, indicate how it will appear when opened?

SSC JE Mechanical Engineering 2012 - Question 9

Which of the answer figure is exactly the mirror image of the given figure, when the mirror is held on the line AB?

SSC JE Mechanical Engineering 2012 - Question 10

A word is represented by only one set of numbers as given in any one of the alternatives. The sets of numbers given in the alternatives are represented by two classes of alphabets as in two matrices given below. The columns and rows of matrix I and II are numbered from 0 to 4.A letter from these matrices can be represented first by its row and next by its column,e.g., ‘A’ can be represented by 24, 31 etc. and ‘P’ can be represented by 11, 32, etc. Identify the set for the letters AELO.

SSC JE Mechanical Engineering 2012 - Question 11

SSC JE Mechanical Engineering 2012 - Question 12

SSC JE Mechanical Engineering 2012 - Question 13

SSC JE Mechanical Engineering 2012 - Question 14

? : JHKI :: TRUS : OMPN

SSC JE Mechanical Engineering 2012 - Question 15

AEJO : ZVQL :: DINS : ?

SSC JE Mechanical Engineering 2012 - Question 16

IRTH : HQSG :: ? : RQPO

SSC JE Mechanical Engineering 2012 - Question 17

16 : 64 :: 25 : ?

SSC JE Mechanical Engineering 2012 - Question 18

5 : 15 :: 40 : ?

SSC JE Mechanical Engineering 2012 - Question 19

SSC JE Mechanical Engineering 2012 - Question 20

SSC JE Mechanical Engineering 2012 - Question 21

SSC JE Mechanical Engineering 2012 - Question 22

SSC JE Mechanical Engineering 2012 - Question 23

SSC JE Mechanical Engineering 2012 - Question 24

SSC JE Mechanical Engineering 2012 - Question 25

SSC JE Mechanical Engineering 2012 - Question 26

SSC JE Mechanical Engineering 2012 - Question 27

SSC JE Mechanical Engineering 2012 - Question 28

SSC JE Mechanical Engineering 2012 - Question 29

Arrange the given words in the order in which they occur in the dictionary and find the last but one word:

SSC JE Mechanical Engineering 2012 - Question 30

Arrange the following wordsin the orderin which they occur in the dictionary. Which will appear fourth in the dictionary ?

SSC JE Mechanical Engineering 2012 - Question 31

Arrange the following words in the orderin which they occurin the Dictionary :
1. Interview
2. Inventory
3. Invention
4. Interval
5. Investment

SSC JE Mechanical Engineering 2012 - Question 32

xy, wy, xy, ut, xy, ?

SSC JE Mechanical Engineering 2012 - Question 33

PQR, HIJ, DEF, ?

SSC JE Mechanical Engineering 2012 - Question 34

NDB, LED, JGG, ?

SSC JE Mechanical Engineering 2012 - Question 35

18, 54, 162, 486, 1458, ?

SSC JE Mechanical Engineering 2012 - Question 36

20, 30, 42,56, 72, ?

SSC JE Mechanical Engineering 2012 - Question 37

Find the wrong number in the given series:
7, 15, 32, 65, 138

SSC JE Mechanical Engineering 2012 - Question 38

A party consisted of a man, his wife, his three sons and their wives and three children in each son’s family. How many werethere in the party ?

SSC JE Mechanical Engineering 2012 - Question 39

₹ 6,500 were divided equally among a certain number of persons. Had there been 15 more persons, each would have got ₹ 30 less. Find the original numberof persons.

SSC JE Mechanical Engineering 2012 - Question 40

From the following alternatives, select the word which cannot be formed using the letters of the given word :
UNIVERSITY

SSC JE Mechanical Engineering 2012 - Question 41

In a certain code MEN is written as MIN and WOMEN is written as WUMIN,then how will CHILD be written in the same code?

SSC JE Mechanical Engineering 2012 - Question 42

If Y = 2, PEN = 11 - 22 - 13, then 10 - 6 - 18 - 24 - 16 = ?

SSC JE Mechanical Engineering 2012 - Question 43

Find out the number which belongsto the given group of number from thefour alternatives.
5, 25, 90, 35, 60

SSC JE Mechanical Engineering 2012 - Question 44

If $$+$$ stands for division
$$-$$ stands for equai to
$$\times$$ stands for addition
$$\div$$ stands for greater than
$$=$$ standsfor less than
$$>$$ stands for multiplication
$$<$$ stands for subtraction
then of the given alternatives which one is correct?

SSC JE Mechanical Engineering 2012 - Question 45

SSC JE Mechanical Engineering 2012 - Question 46

SSC JE Mechanical Engineering 2012 - Question 47

SSC JE Mechanical Engineering 2012 - Question 48

Going 60 metresto the South of his house, Kiran turns left and goes another 20 metres then turning to the North, he goes 40 metres and then starts walking to his house. In which direction is his house. In which direction is his house from there ?

SSC JE Mechanical Engineering 2012 - Question 49

Ram started walking towards East. After 1 km, he turned South and walked 5 km. Again he turned East and walked 2 km. Finally, he turns to the North and walked 9 km. How faris he from the starting point ?

SSC JE Mechanical Engineering 2012 - Question 50

Four positions of a cube are shown below. If symbol Sun is at the top, what symbol will be at the bottom ?

SSC JE Mechanical Engineering 2012 - Question 51

'Liver rot' is caused by

SSC JE Mechanical Engineering 2012 - Question 52

"Proconvertin" is an example of

SSC JE Mechanical Engineering 2012 - Question 53

If the filament current of a coolidgetube is increased, X-rays emitted from it will be ofgreater

SSC JE Mechanical Engineering 2012 - Question 54

The ideaofstationary orbit of electrons in an atom was first introduced by

SSC JE Mechanical Engineering 2012 - Question 55

Which of the following pairs of particles have equal and opposite charge ?

SSC JE Mechanical Engineering 2012 - Question 56

In 'Isobaric process', which parameter remains constant ?

SSC JE Mechanical Engineering 2012 - Question 57

A prototype of a system is

SSC JE Mechanical Engineering 2012 - Question 58

An example of a mathematical function in Structured Query Language (SQL) is

SSC JE Mechanical Engineering 2012 - Question 59

Theintensity of sound is measured in dB-scale and the threshold of hearing is

SSC JE Mechanical Engineering 2012 - Question 60

PAN is pollutantof air. The full name of PAN is

SSC JE Mechanical Engineering 2012 - Question 61

Repeated exposure to small concen-trations of a toxic agent results in accu-mulation of toxic substance over a period of time. This is known as

SSC JE Mechanical Engineering 2012 - Question 62

Which one of these element is NOT considered an essential trace element for the biosphere ?

SSC JE Mechanical Engineering 2012 - Question 63

The term epicenture is associated with

SSC JE Mechanical Engineering 2012 - Question 64

How many countries participated in the first Twenty-20 World Cup in South Africa ?

SSC JE Mechanical Engineering 2012 - Question 65

Which one amongthefollowing is the National Fruit ?

SSC JE Mechanical Engineering 2012 - Question 66

Which language is spoken by maximum number of people in the world?

SSC JE Mechanical Engineering 2012 - Question 67

Name the dome shaped monumentused-to keep Buddhist relics.

SSC JE Mechanical Engineering 2012 - Question 68

‘KIMONO’ is a dressstyle of

SSC JE Mechanical Engineering 2012 - Question 69

Which one of the following famous mon-uments was built to honour the visit of King George V and Queen Mary to India ?

SSC JE Mechanical Engineering 2012 - Question 70

Tulsidas wasthe author of

SSC JE Mechanical Engineering 2012 - Question 71

The study of coins is called

SSC JE Mechanical Engineering 2012 - Question 72

Which amongthe following is not a classical Indian dance ?

SSC JE Mechanical Engineering 2012 - Question 73

The colour of potassium flame through double blue glass is

SSC JE Mechanical Engineering 2012 - Question 74

Precipitation takes place when product of concentration of ions

SSC JE Mechanical Engineering 2012 - Question 75

Dry ice is

SSC JE Mechanical Engineering 2012 - Question 76

Poisoning of drinking water is caused due to presence of

SSC JE Mechanical Engineering 2012 - Question 77

Which institute is known as apex body for development of agriculture ?

SSC JE Mechanical Engineering 2012 - Question 78

The duration for which a patent rightis valid is known as

SSC JE Mechanical Engineering 2012 - Question 79

The concept of supply curve as it is used in economic theory is relevant only for the case of

SSC JE Mechanical Engineering 2012 - Question 80

When the prices of two goods tend to vary inversely, they are said to be

SSC JE Mechanical Engineering 2012 - Question 81

Purchase of cycle by a Household is treated as

SSC JE Mechanical Engineering 2012 - Question 82

Ina Unitary Government, the States derive their powers from

SSC JE Mechanical Engineering 2012 - Question 83

The theory of naturalrights was first enunciated by

SSC JE Mechanical Engineering 2012 - Question 84

Individualism is also known as

SSC JE Mechanical Engineering 2012 - Question 85

Parliamentary Government is called

SSC JE Mechanical Engineering 2012 - Question 86

Fundamental Duties were laid down by

SSC JE Mechanical Engineering 2012 - Question 87

Simon Commission was boycotted because

SSC JE Mechanical Engineering 2012 - Question 88

The Nayanars belonged to the

SSC JE Mechanical Engineering 2012 - Question 89

Name the Sufi Saint with whom Akbar, the Mughal Emperor, is associated:

SSC JE Mechanical Engineering 2012 - Question 90

The Vaisheshika School of Physics propounded the atomic theory during the period of

SSC JE Mechanical Engineering 2012 - Question 91

Who set up aseparate department called the Diwan-i-Khairat?

SSC JE Mechanical Engineering 2012 - Question 92

Birmingham is an Industrial Centre of

SSC JE Mechanical Engineering 2012 - Question 93

Acrescent shaped sand dune is known as

SSC JE Mechanical Engineering 2012 - Question 94

Whichis an ore of dolomite?

SSC JE Mechanical Engineering 2012 - Question 95

Stalactites and stalagmites are found mainly in

SSC JE Mechanical Engineering 2012 - Question 96

Which one of the following is the oldest and deepest fresh waterlake in the world?

SSC JE Mechanical Engineering 2012 - Question 97

Which one of the following plants shows vivipary?

SSC JE Mechanical Engineering 2012 - Question 98

The kind of inflorescence in sunflower is

SSC JE Mechanical Engineering 2012 - Question 99

Moulting in insects is mainlys controlled by

SSC JE Mechanical Engineering 2012 - Question 100

Silver fish is included in the phylum

SSC JE Mechanical Engineering 2012 - Question 101

The strain energy stored in a cantilever beam loaded as shown, will be

SSC JE Mechanical Engineering 2012 - Question 102

The torque producing a unit twist in a shaft of unit length is

SSC JE Mechanical Engineering 2012 - Question 103

Mass per unit of the belt of an open belt drive is 1.5 $$\frac{kg}{m}$$. if the linear velocity of the belt is 10m/s and radius of driving pulley 0.5m, centrifugal tension in the belt is

SSC JE Mechanical Engineering 2012 - Question 104

For a Helical spring, spring index is

SSC JE Mechanical Engineering 2012 - Question 105

Rankine formula (for a column) takes into account which of the following ?

SSC JE Mechanical Engineering 2012 - Question 106

A circular shaft of length L and diameter D is fixed in one end. The other end of the shaft is subjected to a twisting moment T. the angle of rotation of the free end with respect to the fixed end is $$\theta$$. What will be the angle of rotation of the free end if length is doubled and diameter is reduced to $$\frac{D}{2}$$?

SSC JE Mechanical Engineering 2012 - Question 107

Two simply supported beam A and B has the same length L and subjected to equal bending moment M. the stress induced in the beam A and B are $$\sigma_{A} and \sigma_{B}$$
respectively. If the cross section of beam A is b x b/2 and that of beam B is $$\frac{b}{2} \times b$$, then correct relation between $$\sigma_{A} and \sigma_{B} $$is

SSC JE Mechanical Engineering 2012 - Question 108

In a tensile test of a specimen, the ratio of maximum load to the original cross-section area of the test piece is called

SSC JE Mechanical Engineering 2012 - Question 109

Which one of the following assumptions in the theory of pure torsion is false ?

SSC JE Mechanical Engineering 2012 - Question 110

If a beam supported on more than two supports, is called a

SSC JE Mechanical Engineering 2012 - Question 111

If a beam of constant section is subjected throughout its length to a uniform bending moment, it will bend to

SSC JE Mechanical Engineering 2012 - Question 112

Fusible plug for a steam boiler is an alloy consisting of bismuth, lead out

SSC JE Mechanical Engineering 2012 - Question 113

The maximum efficiency that a heat engine operating
between $$327^\circ C and 27^\circC $$ can be

SSC JE Mechanical Engineering 2012 - Question 114

Which of the following gases has the highest value of characteristic gas constant (R)?

SSC JE Mechanical Engineering 2012 - Question 115

The Molecular kinetic energy of a gas is proportional to

SSC JE Mechanical Engineering 2012 - Question 116

Which aspect does not pertain to a free expansion process?

SSC JE Mechanical Engineering 2012 - Question 117

The isentropic expansion of initially superheated steam through the nozzle may approximately be given by the equation

SSC JE Mechanical Engineering 2012 - Question 118

When neither mass nor energy is allowed to cross the boundary of a system, it is then called

SSC JE Mechanical Engineering 2012 - Question 119

Which of the following entities is not a thermodynamic property?

SSC JE Mechanical Engineering 2012 - Question 120

Of the following “path function” quantity is

SSC JE Mechanical Engineering 2012 - Question 121

Relation ds=$$\frac{\delta}{T}$$ good in case of

SSC JE Mechanical Engineering 2012 - Question 122

During throtting which thermodynamic property does not change?

SSC JE Mechanical Engineering 2012 - Question 123

The internal energy of a perfect gas depends on

SSC JE Mechanical Engineering 2012 - Question 124

During an adiabatic process, the pressure P of a fixed mass of an ideal gas changes by ΔP and its volume V changes by ΔV. The value of $$\frac{V}{V}$$ is given by

SSC JE Mechanical Engineering 2012 - Question 125

The ratio of air required for complete combustion of carbon dioxide and that to carbon monoxide is

SSC JE Mechanical Engineering 2012 - Question 126

In case of Boyle’s law, if pressure increases by 1% the percentage decrease in volume is

SSC JE Mechanical Engineering 2012 - Question 127

Critical pressure is the pressure of steam at

SSC JE Mechanical Engineering 2012 - Question 128

A compression ignition engine is a

SSC JE Mechanical Engineering 2012 - Question 129

In diesel engine, the ignition takes place

SSC JE Mechanical Engineering 2012 - Question 130

The petrol engine works on

SSC JE Mechanical Engineering 2012 - Question 131

Process in thermodynamic cycles are
I : Isentropic II : Constant Volume
III: Constant pressure IV : Isothermal
Which process of is/are not involved in an air standard dual combustion cycle?

SSC JE Mechanical Engineering 2012 - Question 132

Morse test is conducted on multi cylinder engine to find the engine’s

SSC JE Mechanical Engineering 2012 - Question 133

A nozzle is said to be choked when

SSC JE Mechanical Engineering 2012 - Question 134

In a water-tube boiler, the flue gas flows through the following accessories :
1. Super heater 2. ID fan
3. Air heater 4. Economizer
Which of the following gives, the correct sequences of the flue gas through these accessories:

SSC JE Mechanical Engineering 2012 - Question 135

Lean air fuel mixture is required for

SSC JE Mechanical Engineering 2012 - Question 136

What material is used for the insulating body of a spark plug?

SSC JE Mechanical Engineering 2012 - Question 137

Which element regulates the pressure strokes in the fuel injection pump of a diesel engine?

SSC JE Mechanical Engineering 2012 - Question 138

For complete specification of super heated vapour, one needs

SSC JE Mechanical Engineering 2012 - Question 139

Safety valve used with locomotive boilers is operated by

SSC JE Mechanical Engineering 2012 - Question 140

Behaviour of which of the following steam quantities is closest to that of a gas?

SSC JE Mechanical Engineering 2012 - Question 141

A carnot engine uses nitrogen as the working fluid. The heat supplied is 53 kJ and adiabatic expansion ratio is 16 : 1 The receiver temperature is 295 K. The heat rejected is kJ is

SSC JE Mechanical Engineering 2012 - Question 142

In a centrifugal pump, the liquids enters the pump

SSC JE Mechanical Engineering 2012 - Question 143

for a fluid at rest

SSC JE Mechanical Engineering 2012 - Question 144

A pelton wheel is

SSC JE Mechanical Engineering 2012 - Question 145

One torr pressure is equivalent to

SSC JE Mechanical Engineering 2012 - Question 146

Which one of the following is the Bulk Modulus K of fluid?

SSC JE Mechanical Engineering 2012 - Question 147

Centrifugal pump is started with its delivery valve is

SSC JE Mechanical Engineering 2012 - Question 148

In flow through a pipe, the transition from Laminar to turbulent does not depends on

SSC JE Mechanical Engineering 2012 - Question 149

Pick up the wrong statement about Centrifugal Pump

SSC JE Mechanical Engineering 2012 - Question 150

A pipe flow is said to be laminar, if

SSC JE Mechanical Engineering 2012 - Question 151

The Kinetic energy associated with a jet through a cross sectional area ‘a’ having density $$\rho$$ and velocity ‘v’ is

SSC JE Mechanical Engineering 2012 - Question 152

Which shear stress distribution is the correct one corresponding to the flow through a pipe of circular cross-section with parabolic velocity profile?

SSC JE Mechanical Engineering 2012 - Question 153

Flow through a supersonic nozzle is an example of

SSC JE Mechanical Engineering 2012 - Question 154

Loss of energy due to sudden enlargement of pipe cross-section in meters of water is given by

SSC JE Mechanical Engineering 2012 - Question 155

For maximum power transmission through a pipe line, the friction head loss equals

SSC JE Mechanical Engineering 2012 - Question 156

What should be the ratio of jet speed to blade speed for maximum efficiency of a pelton wheel?

SSC JE Mechanical Engineering 2012 - Question 157

Pressure of 80 kPa is equivalent to a head in meter of carbon tetrachloride of relative density 1.59 of the value

SSC JE Mechanical Engineering 2012 - Question 158

Two pipe systems are said to be equivalent when in two systems

SSC JE Mechanical Engineering 2012 - Question 159

Flow between an two stream lines

SSC JE Mechanical Engineering 2012 - Question 160

Pseudo-plastic substances are non-Newtonian fluids for which

SSC JE Mechanical Engineering 2012 - Question 161

For helical gears, the helix angle generally ranges from

SSC JE Mechanical Engineering 2012 - Question 162

Which of the following is not a foundry tool?

SSC JE Mechanical Engineering 2012 - Question 163

Filler metal is used in

SSC JE Mechanical Engineering 2012 - Question 164

Hot working of metal is carried out

SSC JE Mechanical Engineering 2012 - Question 165

The vertical passage for bringing molten metal to mould cavity is called

SSC JE Mechanical Engineering 2012 - Question 166

In arc welding, the arc length should be approximately equal to

SSC JE Mechanical Engineering 2012 - Question 167

The forging of the steel specimen is normally done at a temperature of

SSC JE Mechanical Engineering 2012 - Question 168

Which part of the cutting tool is prone to crater wear?

SSC JE Mechanical Engineering 2012 - Question 169

The size of a Shaper is specified by

SSC JE Mechanical Engineering 2012 - Question 170

The process of pouring molten metal in the cavity of a metallic mould by gravity is known as

SSC JE Mechanical Engineering 2012 - Question 171

The Soldering Iron is heated in a gas flame until

SSC JE Mechanical Engineering 2012 - Question 172

Cupola is best suited for melting

SSC JE Mechanical Engineering 2012 - Question 173

Railway rails are generally made of

SSC JE Mechanical Engineering 2012 - Question 174

In case of slotting machine, cutting action takes place in

SSC JE Mechanical Engineering 2012 - Question 175

In a drill operation

SSC JE Mechanical Engineering 2012 - Question 176

Lathe bed is made of

SSC JE Mechanical Engineering 2012 - Question 177

While using High speed steel tools on lathe, the speed of chuck will be lowest while machinin

SSC JE Mechanical Engineering 2012 - Question 178

When turning Mild steel, if the area of cross-section of the cut remain constant, the cutting force will be minimum if depth of cut is

SSC JE Mechanical Engineering 2012 - Question 179

In which type of welding molten metal is poured for joining the metals?

SSC JE Mechanical Engineering 2012 - Question 180

In a single V-butt welds the angle between edges is kept about

SSC JE Mechanical Engineering 2012 - Question 181

Permeability of a foundry sand is

SSC JE Mechanical Engineering 2012 - Question 182

The crank radius of a slider crank mechanism is 10mc. If the crank radius is increased to 12cm. the stroke length will increase by

SSC JE Mechanical Engineering 2012 - Question 183

Assertion (A) :A clutch is the best means to connect a driving shaft with a driven shaft for regular power transmission
Reason (R):
A clutch can be frequently engaged and disengaged at operators will

SSC JE Mechanical Engineering 2012 - Question 184

A spur gear with pitch circle diameter D has number of teeth T. The module m is defined as

SSC JE Mechanical Engineering 2012 - Question 185

A ball and socket joint forms a

SSC JE Mechanical Engineering 2012 - Question 186

BCD is a four-bar mechanism in which AB = 30 cm and CD = 45 cm. At an instant, both AB and CD are perpendicular to fixed link AD. If velocity of B at this condition is V, then velocity of C is

SSC JE Mechanical Engineering 2012 - Question 187

The inner and outer radius of friction surface of a plate clutch are 50 mm and 100 mm respectively. What is the ratio of maximum intensity of pressure on clutch plate if magnitude of axial force is 4 KN? Assume uniform wear theory

SSC JE Mechanical Engineering 2012 - Question 188

The thickness of a boiler plate is 16mm, the diameter of rivet used in the boiler joint is

SSC JE Mechanical Engineering 2012 - Question 189

Lewis equation in spur gear design is applied to

SSC JE Mechanical Engineering 2012 - Question 190

Degree of freedom of a slider crank mechanism is

SSC JE Mechanical Engineering 2012 - Question 191

Match the List-I with list-II and select the correct match using the codes below

SSC JE Mechanical Engineering 2012 - Question 192

The reaction between number of lower pair(P) and number of links (L) in a four link kinematic chain is given by

SSC JE Mechanical Engineering 2012 - Question 193

The stiffness of the spring in a hartnell governor is equal to $$S_{1}$$ = Spring force exerted on the slleve at maximum radius of rotation $$S_{2}$$= Spring force exerted on the slleve at minimum radius of rotation

SSC JE Mechanical Engineering 2012 - Question 194

The differential gear in the automobiles is used to

SSC JE Mechanical Engineering 2012 - Question 195

Which of the following gear system have minimum axial thrust?

SSC JE Mechanical Engineering 2012 - Question 196

A sliding bearing which can support steady loads without any relative motion between the journal and the bearing is called

SSC JE Mechanical Engineering 2012 - Question 197

Form the Lewis equation Fb = f.p.y.b, the strength factor of the gear is given by the product

SSC JE Mechanical Engineering 2012 - Question 198

A simply supported beam is subjected to a point load P at the middle of the beam. The correct normal stress distribution across its cross-section is given by which figure?

SSC JE Mechanical Engineering 2012 - Question 199

The shear strength, tensile strength and, compressive strength of rivet joint are 100N, 120N and 150N respectively. If strength of the unriveted plate is 200N, the efficiency of rivet joint is

SSC JE Mechanical Engineering 2012 - Question 200

a simply supported beam carries a uniformly distributed load of w kgf per unit length over the whole span (l) the shear force at the center is

SSC JE Mechanical Engineering 2012

SSC JE Mechanical Engineering 2012

Join CAT 2026 course by 5-Time CAT 100%iler

Download resources