SSC JE Civil Engineering 23rd Jan 2018 Shift-1

In the following question, select the related word pair from the given alternatives

In the following question, select the related number from the given alternatives.

In the following question, select the odd word from the given alternatives.

For the following questions answer them individually

A Shopping mall worker loads his trolley and walks 50 m through an alley which is going North, then he turns to his left and walks 15 m, then he turns South and walks another 15 m, then he turns East and walks 25 m and then he turns south and walks 35 m. Where is he now with reference to his starting position?

Two battle tanks start from the same point. Tank A travels 12 km South, then turns to its left and travels 7 km. Tank B travels 7 km South, then turns West and travels 9 km, then turns to its left and travels 5 km. Where is tank A with respect to tank B?

In the question two statements are given, followed by two conclusions, I and II. You have to consider the statements to be true even if it seems to be at variance from commonly known facts. You have to decide which of the given conclusions, if any, follows from the given statements.

Statement I: No cats are dogs
Statement II:
Some cats are carnivores

Conclusion I: All dogs are carnivores
Conclusion II:
All carnivores are dogs

In the question three statements are given, followed by three conclusions, I, II and III. You have to consider the statements to be true even if it seems to be at variance from commonly known facts. You have to decide which of the given conclusions, if any, follows from the given statements
Statement I:
No bronze is copper
Statement II:
Some alloy is bronze
Statement III:
Some zinc is alloy

Conclusion I: Some zinc is bronze
Conclusion II:
Some copper is zinc
Conclusion III:
some alloy is copper

In the following figure square represents astronauts, triangle represent swimmers, circle represents women and rectangle represents Indians. Which set of letter represents women who are either astronauts or swimmer ?

A word is represented by only one set of numbers as given in any one of the alternatives .The set of numbers given in the alternatives are represented by two classes of alpahabets as shown in the given two matrices.The column and rows of Matrix-1 are numbered form 0 to 4 and that of Matrix-II is numbered from 5 to 9.A letter from these matrices can be represented first by its row and next by its colum .for c can be represented by 76,89 etc,similarly you have to identify set for the word 'SODA'

The ARDC is a branch of the NABARD. What is the full form of ARDC?

Aqua regia is a mixture of ______.

Which of the following statement(s) is/are TRUE?
I. Fuse is generally placed in series with the device.
II. Fuse is generally placed in parallel with the device.
III. Fuse wire has high melting point.

Which of the following statement is INCORRECT?

Calculate the proportion (in percentage) of fine aggregate in combined aggregate so that the fineness modulus of the combined aggregate becomes 6.4.The fineness modulus of coarse aggregate and fine aggregate in the concrete mix is 7.6 and 2.8 respectively

Calculate the quantity of the earth works in cubic meter for a canal embankment of 100 m long having cross section areas at the two sections are 20 square meters and 80 square meters. Use trapezoidal method.

An electric generator is installed in the building at a cost of Rs. 50,000. Calculate the annual sinking fund (Rs.) required to be deposited to accumulate the whole amount of 5% compound interest. Assume the life of the electric generator as 10 years.

Calculate the correction for temperature for a tape of length ‘L’, if the increase in temperature is ‘T’ above the standard temperature. The coefficient of the
temperature for tape material is ‘a’.

- Which of the following statement is correct for proper adjustment of the theodolite?

Which of the followings are correct for sensitivity of the bubble tube?

Calculate the volume of the earthwork (in cubic meter) using trapezoidal method if the cross section areas of the three section of embankment at an interval of 20 m are 40 square meters, 50 square meters and 80 square meters.

The cell pressure and pore water pressure is increased from 0.1 N/sq. m to 0.26 N/sq. m and 0.07 N/sq. m to 0.15 N/sq. m respectively in the triaxial test. The Skempton’s pore pressure parameter is given by_____.

Which one of the following is correct for impulse turbine?

Which of the following is the correct assumption of the Kennedy’s theory?

A stream has flow of 20 cumecs and BOD concentration of 10 mg/l receives the industrial waste water having flow of 1.5 cumecs and BOD concentration of 250 mg/l. What is the BOD concentration (mg/l) of stream at downstream point of meeting of stream with industrial waste?

If the moment of inertia of a section about its axis is l and its effective sectional area is A, its radius of gyration r about the axis is

Pick up the correct statement from the following

Pick up the correct statement from the following

Pick up the correct statement from the following

The flakiness index of aggregates is the percentage by weight of particles in it whose thickness is less than_________

The field test for the quality of cement consists in putting a small quantity of cement in a bucket containing water. A good quality cement will:

For a continuous slab supported at ends and carried over intermediate beams

A rolled steel joist is simply supported at its end and carries a uniformly distributed load which causes a maximum deflection of 10 mm and slope at the ends of 0.002 radian. The length of the joist will be

A lift of weight W is lifted by a rope with an acceleration f. If the area of cross-section of the rope is A, the stress in the rope is

A material which obeys Hooke’s law is subjected to direct stress σ0. At its elastic limit, which of the following statements is true?

Keeping the depth d constant, the width of a cantilever of length l of uniform strength loaded with a uniformly distributed load w varies from zero at the free end and

A shaft is subjected to a bending moment M and a torque T simultaneously. The ratio of the maximum bending stress to maximum shear stress developed in the shaft is

Join CAT 2026 course by 5-Time CAT 100%iler

Crack CAT 2026 & Other Exams with Cracku!