SSC JE Civil Engineering 24th Jan 2018 Shift-1

Download PDF
For the following questions answer them individually
Cracku Banner
SSC JE Civil Engineering 24th Jan 2018 Shift-1 - Question 29

Showing a photograph to E, Mr X said that, the lady in the photograph was his spouse's mother. E said that the lady was his wife's mother's mother. If the lady in the photograph has only one daughter, then how is E related to X?

SSC JE Civil Engineering 24th Jan 2018 Shift-1 - Question 38

A cyclist goes 8 km East, then turn to his left and travels 7 km, then turns East and travels 10 km then turns South and travels 7 km. Where is he now with reference to his starting position?

SSC JE Civil Engineering 24th Jan 2018 Shift-1 - Question 39

Two workmen L and M start at the point. L walks 25 m East, then turns left and walks 15 m. In the meanwhile M walks 18 m South, then turns to his right and walks 17 m , then turns North and walks 33 m. Where is M with respect to L?

SSC JE Civil Engineering 24th Jan 2018 Shift-1 - Question 40

In the question two statements are given, followed by two conclusions, I and II. You have to consider the statements to be true even if it seems to be at variance from commonly known facts. You have to decide which of the given conclusions, if any, follows from the given statements.
Statement I: All cloth is silk
Statement II: All silk is cotton
Conclusion I: Some cotton is cloth
Conclusion II: All cloth is cotton

SSC JE Civil Engineering 24th Jan 2018 Shift-1 - Question 41

In the question three statements are given, followed by three conclusions, I, II and III. You have to consider the statements to be true even if it seems to be at variance from commonly known facts. You have to decide which of the given conclusions, if any, follows from the given statements.
Statement I: All caterpillars are butterflies
Statement II: Some caterpillars are insects
Statement III: No butterflies are animals

Conclusion I: Some insects are butterflies
Conclusion II: All insects are animals
Conclusion III: Some animals are caterpillars

Cracku Banner
SSC JE Civil Engineering 24th Jan 2018 Shift-1 - Question 44

In the following figure, square represents athletes, triangle represents engineers, circle represents fathers and rectangle represents entrepreneurs. Which set of letters represents athletes who are either entrepreneurs or fathers?

SSC JE Civil Engineering 24th Jan 2018 Shift-1 - Question 50

A word is represented by only one set of numbers as given in any one of the alternatives. The sets of numbers given in the alternatives are represented by two classes of alphabets as shown in the given two matrices. The columns and rows of Matrix-I are numbered from 0 to 4 and that of Matrix-II are numbered from S to 9. A letter from these matrices can be represented first by its row and next by its column, for example 'K' can be represented by 32, 01 etc and 'R' can be represented by 79, 99 etc. Similarly, you have to identify the set for the word 'GLUE'.

Cracku Banner
SSC JE Civil Engineering 24th Jan 2018 Shift-1 - Question 84

Which of the following statement(s) is/are CORRECT?
I. Metallic oxides are said to be basic oxides.
II. Non-metallic oxides are basic in nature.
III. All acids have similar chemical properti es.

SSC JE Civil Engineering 24th Jan 2018 Shift-1 - Question 87

Which of the following occurs due to refraction?
I. The apparent displacement of a pencil, partly immersed in water.
II. Sun appears before the sunrise.
III. Sky appears blue.

SSC JE Civil Engineering 24th Jan 2018 Shift-1 - Question 89

The phenomena of electromagnetic induction is ______.

SSC JE Civil Engineering 24th Jan 2018 Shift-1 - Question 106

Compaction factor is defined as the ratio of _____.

SSC JE Civil Engineering 24th Jan 2018 Shift-1 - Question 108

Which of the following shows the CORRECT expression for target mean strength ($$f_{om}$$) of concrete. if the characteristic strength and standard deviation is given by $$f_{ok}$$, and $$\sigma$$ respectively?

SSC JE Civil Engineering 24th Jan 2018 Shift-1 - Question 113

A wall of width 300 mm contains two T junctions. The height of the wall is 3 m and total length of the central line is 150 m. Calculate the quantity of the brick work (in cubic meter) using central line method.

SSC JE Civil Engineering 24th Jan 2018 Shift-1 - Question 117

In long wall and short wall method, the length of the short wall is the equal to the center to center length of wall minus _____.

SSC JE Civil Engineering 24th Jan 2018 Shift-1 - Question 118

Calculate the quantity (cubic meter) of the earthwork for a canal of 50 m long. Depths of canal at two extreme sections are 3 m and 5 m. The bottom width and top width of the canal are 2 m and 4 m. Use midsection method.

Cracku Banner
SSC JE Civil Engineering 24th Jan 2018 Shift-1 - Question 122

Which one is the CORRECT option for the cumulative errors?
1. It decreases with an increase in measurement.
2. It is directly proportional to the length of the lin e.
3. It may be positive or negative.
4. It is inversely proportional to th e length of the line.

SSC JE Civil Engineering 24th Jan 2018 Shift-1 - Question 129

Calculate the horizontal distance between the staff and instrument, if the staff readings are 1.4 m and 2.9 m, which corresponds to lower and the upper horizontal lines of cross hair. The lens of the telescope of the tachometer is of anallactic lens.

SSC JE Civil Engineering 24th Jan 2018 Shift-1 - Question 130

The volume of an embankment having a total length of L and cross section areas of four sections at an interval of H are $$A_1, A_2, A_3, A_4$$ using the trapezoidal method is

SSC JE Civil Engineering 24th Jan 2018 Shift-1 - Question 139

Which of the following represents the critical velocity for the discharge per unit width of $$q m^3/s/m$$ from the wide rectangular channel?

SSC JE Civil Engineering 24th Jan 2018 Shift-1 - Question 148

Calculate the capacity (vehicle per hour) of the road when reaction time of the driver is 2 seconds. The design speed is 80 kmph and average length of the vehicle is 6 m. Take coefficient of friction as 0.35.

Cracku Banner
SSC JE Civil Engineering 24th Jan 2018 Shift-1 - Question 169

If cylinder specimen is used to test compressive strength of concrete, equivalent cubes strength can be found using:

SSC JE Civil Engineering 24th Jan 2018 Shift-1 - Question 173

If P, Y and Z are weights of cement, fine aggregates and coarse aggregates respectively and W/C is the water cement ratio, the minimum quantity of water to be added to first batch is obtained by the equation

SSC JE Civil Engineering 24th Jan 2018 Shift-1 - Question 176

What should be done to ensure constant moisture content in aggregates?

SSC JE Civil Engineering 24th Jan 2018 Shift-1 - Question 177

For batching 1:3:6 concrete mix by volume, which of the following are the ingredients required per bag of 50kg cement?

SSC JE Civil Engineering 24th Jan 2018 Shift-1 - Question 178

Which of the following statements is/are true?

SSC JE Civil Engineering 24th Jan 2018 Shift-1 - Question 183

If the length of a wall on either side of a lintel opening is at least half of its effective span L, the load W carried by the lintel is equivalent to the weight of brick work contained in an equilateral triangle, producing a maximum bending moment
A] $$\frac{WL}{2}$$
B] $$\frac{WL}{4}$$
C] $$\frac{WL}{6}$$
D] $$\frac{WL}{8}$$
E] $$\frac{WL}{12}$$

SSC JE Civil Engineering 24th Jan 2018 Shift-1 - Question 186

If P kg /m$$^2$$ is the upward pressure on the slab of a plain concrete footing whose projection on either side of the wall is a cm. the depth of foundation D is given by
A] $$D = 0.00775 a\sqrt{P}$$
B] $$D = 0.0775 a\sqrt{P}$$
C] $$D = 0.775 P\sqrt{a}$$

SSC JE Civil Engineering 24th Jan 2018 Shift-1 - Question 187

Which of the following statements is true?

SSC JE Civil Engineering 24th Jan 2018 Shift-1 - Question 188

if the length of a combined footing for two columns l meters apart is L and the projection on the left side of the exterior column is x. then the projection y on the right side of the exterior column. in order to have a uniformly distributed load is (Where k is the distance of center of gravity of column loads)
A] $$y = L - (l - x)$$
B] $$y = \frac{L}{2} + (l - x)$$
C] $$y = \frac{L}{2} - (l + x)$$
D] $$y = \frac{L}{2} - (l - x)$$

SSC JE Civil Engineering 24th Jan 2018 Shift-1 - Question 190

The general expression for the B.M. of a beam of length l is $$M = \frac{wl}{2} x - \frac{wx^2}{2}$$, the beam carries

SSC JE Civil Engineering 24th Jan 2018 Shift-1 - Question 191

The moment of inertia of a rectangular section of width B and depth D about an axis passing through C.G. and parallel to its width is
A] $$\frac{BD^2}{6}$$
B] $$\frac{BD^3}{6}$$
C] $$\frac{BD^3}{12}$$
D] $$\frac{B^2D}{6}$$

SSC JE Civil Engineering 24th Jan 2018 Shift-1 - Question 192

Pick up the correct statement from the following

Cracku Banner
SSC JE Civil Engineering 24th Jan 2018 Shift-1 - Question 200

For double angles carrying tension, placed back to back and connected to either side of the gusset plate, the sectional area of the section, is equal to the cross sectional area of

Join CAT 2026 course by 5-Time CAT 100%iler

Start your IIM journey with the right preparation and crack CAT 2026.

Enroll Now