DMRC Civil Engineering Paper-1 2014

Download PDF

From among the five doctors 1, 2, 3, 4 and 5, four engineers G, H, K, L and six teachers M, N, O, P, Q and R, some teams are to be selected. Of these 1, 2, G, H, O, P, Q are females and the rest are males. The formation of teams is subject to the following conditions:

Wherever there is a male doctor, there will not be a female teacher. Wherever there is a male engineer, there will not be a female doctor. There shall not be more than two male teachers
in any team.

DMRC Civil Engineering Paper-1 2014 - Question 1

If the team consists of two doctors, two female teachers and two engineers, then all the following teams are possible except:

DMRC Civil Engineering Paper-1 2014 - Question 2

If the team consists of two doctors, three female teachers and two engineers, then the members of the team are:

DMRC Civil Engineering Paper-1 2014 - Question 3

If the team consists of three doctors, two male engineers and two teachers, then the members of the team could be:

For the following questions answer them individually
DMRC Civil Engineering Paper-1 2014 - Question 6

A person shall be disqualified for being a member of either house of parliament if he is so disqualified under Tenth schedule. Under Tenth schedule the person shall be disqualified for following reason:

DMRC Civil Engineering Paper-1 2014 - Question 11

A candidate gets 72% votes out of total votes and he wins by a margin of 264 votes. Total vote and vote polled for elected candidate are respectively:

DMRC Civil Engineering Paper-1 2014 - Question 15

IBSA is a ______ and 7th IBSA summit will be held in ________ :

DMRC Civil Engineering Paper-1 2014 - Question 16

A rectangular field is surrounded by four semi circular flower beds. If the length and breadth of the field are 6 m and 4 m respectively, find the cost of raising the flower beds at the rate of Rs. 8/- per M2. ($$\pi$$ = 3.14):

DMRC Civil Engineering Paper-1 2014 - Question 18

According to the world investment report 2014, released by UNCTAD in June, 2014, India latest ranking of most favoured destination for investment by transnational corporation is:

DMRC Civil Engineering Paper-1 2014 - Question 21

Total weight of 3 boxes is $$60\frac{1}{2}$$ Kg. $$2^{nd}$$ box weighs $$3\frac{1}{2}$$ Kg more than 1st box. The 3rd box weighs $$2\frac{1}{2}$$ Kg more than 2nd box. The
weight of 1st box is:

DMRC Civil Engineering Paper-1 2014 - Question 22

12 men and 18 boys working $$7\frac{1}{2}$$ hours a day can do a work in 60 days. If one man works equal to 2 boys, then the number of boys required to help 21 men to do twice
the work in 50 days working 9 hours a day will be:

DMRC Civil Engineering Paper-1 2014 - Question 26

Ebola Virus Disease (EVD) is a severe human disease and has been declared as ‘Global Health Emergency’ by WHO. Ebola virus takes its name from a:

DMRC Civil Engineering Paper-1 2014 - Question 30

Twelve solid spheres of the same size are made by melting a solid metallic cylinder of base diameter 2 cm and height 16 cm. The diameter of each sphere is:

DMRC Civil Engineering Paper-1 2014 - Question 31

There are seven colours in a rainbow in a particular sequence. Besides the known sequence in how many other possible ways can rainbows be formed by re-sequencing the colours:

DMRC Civil Engineering Paper-1 2014 - Question 34

Six families A, B, C, D, E, and F are living in houses in a row. B has F and D as neighbours, E has A and C as neighbours. A does not live next to either F or D, C does not live next to D. Who are F's next door neighbours?

DMRC Civil Engineering Paper-1 2014 - Question 35

If Ranchi is called Delhi, Delhi is called Mumbai, Mumbai is called Dehradun, Dehradun is called Nagpur and Nagpur is called Meerut then where is the Gate way of India?

DMRC Civil Engineering Paper-1 2014 - Question 37

Union finance minister announced to set up an expenditure Management Commission in the union budget 2014-15. Union Govt. recently decided to appoint .......... head of the expenditure Management Commission:

DMRC Civil Engineering Paper-1 2014 - Question 38

Arjun is Arvind’s brother. Swati is Arvind’s mother. Prakash is Swati’s father. Malti is Prakash’s mother. How Arjun is related to Malti?

DMRC Civil Engineering Paper-1 2014 - Question 39

In a certain code ‘bad and good’ is written as ‘325’, ‘two and none’ is written as ‘462’ and ‘that is bad’ is written as ‘159’. How would ‘good’ be written in that code?

DMRC Civil Engineering Paper-1 2014 - Question 50

The ratio of specific weight of a liquid to the specific weight of pure water at a standard temperature is called:

DMRC Civil Engineering Paper-1 2014 - Question 52

The hydraulic mean depth or the hydraulic radius is the ratio of:

DMRC Civil Engineering Paper-1 2014 - Question 55

The bricks should be burnt at temperature from:

DMRC Civil Engineering Paper-1 2014 - Question 56

In plane surveying:

DMRC Civil Engineering Paper-1 2014 - Question 60

The water content ratio of a soil is defined as the ratio of the:

DMRC Civil Engineering Paper-1 2014 - Question 62

Reinforced cement concrete is equally strong in taking:

DMRC Civil Engineering Paper-1 2014 - Question 63

If $$\sigma_{cb}$$ is the permissible stress in compression due to bending in concrete in N/mm$$^2$$, the modular ratio (m) is of the order of:

DMRC Civil Engineering Paper-1 2014 - Question 64

The centre to centre spacing of vertical stirrups, in a rectangular beam, is:

DMRC Civil Engineering Paper-1 2014 - Question 70

If a three hinged parabolic arch carries a uniformly distributed load on its entire span, every section of the arch resists:

DMRC Civil Engineering Paper-1 2014 - Question 77

The maximum pressure which a soil can carry without shear failure, is called:

DMRC Civil Engineering Paper-1 2014 - Question 83

A cantilever RCC beam 230 mm × 450 mm effective depth has span 4m and carries a UDL of 500 KN/m inclusive of its selfweight, the bending moment is:

DMRC Civil Engineering Paper-1 2014 - Question 84

An ISA 50 × 50 × 6 is welded on a gusset plate of 20 mm thick with fillet weld size 4mm, The Over all total length of weld is 100 mm, the effective length of weld is:

DMRC Civil Engineering Paper-1 2014 - Question 86

The slenderness ratio of a steel member is:

DMRC Civil Engineering Paper-1 2014 - Question 90

A floating body is in stable equilibrium:

DMRC Civil Engineering Paper-1 2014 - Question 94

During leveling if back sight is more than fore sight:

DMRC Civil Engineering Paper-1 2014 - Question 95

If the depth of a simply supported beam carrying an isolated load at its centre is doubled, the deflection at centre will be changed by a factor of:

DMRC Civil Engineering Paper-1 2014 - Question 96

Pick up the correct statement from the following:

DMRC Civil Engineering Paper-1 2014 - Question 100

The length of a line measured with 20 m chain is found to be 400 m. If the actual length of the chain is 20.05 m, the true length of the line, is:

DMRC Civil Engineering Paper-1 2014 - Question 102

The instrument which is used in plane tabling for obtaining horizontal and vertical distance directly without resorting to changing, is known as:

DMRC Civil Engineering Paper-1 2014 - Question 104

A steel rod 50 mm in diameter, 300 cm long is subjected to a sudden pull of 10 tonnes the maximum instantaneous stress induced in the rod will be:

DMRC Civil Engineering Paper-1 2014 - Question 105

BOD represents:

DMRC Civil Engineering Paper-1 2014 - Question 106

A circular hole of 50 mm diameter is cut out from a circular disc of 100 mm diameter as shown in Fig. The center of gravity of the section will lie:

DMRC Civil Engineering Paper-1 2014 - Question 107

The method of Three-moment equations is used to analyze:

DMRC Civil Engineering Paper-1 2014 - Question 109

A reinforced concrete beam is cast during a summer month when the ambient temperature is around 42°C. During the winter when the ambient temperature is around 5°C, the stress in the concrete will be:

DMRC Civil Engineering Paper-1 2014 - Question 110

Principal Plane is a plane in a stressed body of material on which

DMRC Civil Engineering Paper-1 2014 - Question 112

In a riveted connection, a minimum distance of the rivet from the edge is kept with a view to preventing failure due tosssssssss

DMRC Civil Engineering Paper-1 2014 - Question 115

Allowable bearing pressure for a foundation depends on:

Join CAT 2026 course by 5-Time CAT 100%iler

Start your IIM journey with the right preparation and crack CAT 2026.

Enroll Now