Two thin wires, Wire-1 of diameter $$0.650\,\mathrm{mm}$$ and Wire-2 of unknown diameter $$d$$ are given. To obtain the value of $$d$$, the diameters of the two wires are measured with a screw gauge. The screw gauge has a pitch of $$0.5\,\mathrm{mm}$$ and there are $$100$$ divisions on the circular scale (CS). The smallest division on the linear scale (LS) is $$0.5\,\mathrm{mm}$$. The table shows the readings of LS and CS for the measurements. The value of $$d$$ (in $$\mu\mathrm{m}$$) is:

	Readings
	LS (mm)	CS
Wire-1	0.5	42
Wire-2	1.5	95