ISRO Scientist or Engineer Refrigeration & Air-Conditioning 2019

Instructions

For the following questions answer them individually

ISRO Scientist or Engineer Refrigeration & Air-Conditioning 2019 - Question 51


A uniform wooden cylinder has a specific gravity of 0.5. Find the ratio of diameter to length of the cylinderso that it will just float upright in a state of neutral equilibrium in water

ISRO Scientist or Engineer Refrigeration & Air-Conditioning 2019 - Question 52


In s siphon, the summit is 3 m above the water level in the reservoir from which the flow is being discharged. If the head loss from the inlet of the siphon to the summit is 1.5 m and the velocity head at the summitis 0.5 m, the absolute pressure at the summit is

ISRO Scientist or Engineer Refrigeration & Air-Conditioning 2019 - Question 53


Two pipe lines of equal length and diameters of 10cm and 40cm are connected in parallel between two reservoirs. If friction factor f is same for both the pipes, the ratio of the
discharges in the larger to the smaller pipe is

ISRO Scientist or Engineer Refrigeration & Air-Conditioning 2019 - Question 54


The fluid property responsible for the problem of water hammer is

ISRO Scientist or Engineer Refrigeration & Air-Conditioning 2019 - Question 55


Within a boundary layer

ISRO Scientist or Engineer Refrigeration & Air-Conditioning 2019 - Question 56


The values of enthalpy of steamat inlet and outlet of a steam turbine in a Rankinecycle are 2800 kJ/kg and 1800 kJ/kg respectively. Neglecting pump work, the specific steam
consumptionin kg/kW-hour is

ISRO Scientist or Engineer Refrigeration & Air-Conditioning 2019 - Question 57


A pump handlinga liquid raises its pressure from 1 barto 30 bar. Take the density of liquid as 990 kg/m$$^3$$. The isentropic specific work done by the pumpin kj/kg is

ISRO Scientist or Engineer Refrigeration & Air-Conditioning 2019 - Question 58


A heat engine using lake water at $$12^\circ C$$ as source and the surrounding atmosphere at $$2^\circ C$$ as sink executes 1080 cycles per min. If the amount of heat drawn per cycle is 57 J, then the output of the engine will be

ISRO Scientist or Engineer Refrigeration & Air-Conditioning 2019 - Question 59


The unit of Stefan Boltzmann constant is

ISRO Scientist or Engineer Refrigeration & Air-Conditioning 2019 - Question 60


In a furnace, the wall thickness is 60 cm and is 100 cm wide by 150 cm height made of material with thermal conductivity 0.4 W/mK. The temperature inside and outside are $$1000^\circ C$$ and $$4^\circ C$$ respectively. The thermal resistance is

cracku

Boost your Prep!

Download App