ISRO Scientist or Engineer Mechanical 2011

Instructions

For the following questions answer them individually

ISRO Scientist or Engineer Mechanical 2011 - Question 41


A thin cylinder contains fluid at a pressure of $$30 kg/cm^2$$.The inside diameter of the shell is 60 cm and the tensile stress in the material is to be limited to $$900 kg/cm^2$$. The shell must have minimum wall thickness of.

Video Solution

ISRO Scientist or Engineer Mechanical 2011 - Question 42


When a shaft is subjected to combined twisting moment (T) and bending moment (M), the equivalent twisting moment is equal to

Video Solution

ISRO Scientist or Engineer Mechanical 2011 - Question 43


Two blocks with masses M and m are in contact with each other and are resting on 2 horizontal friction less floor. When horizontal force F is applied to the heavier, the blocks accelerate to the right. The force between the two blocks are

Video Solution

ISRO Scientist or Engineer Mechanical 2011 - Question 44


A machine mounted on a single coil spring has a perriod of free vibration of T. If the spring is cut into four equal parts and placed in parallel and the machine is mounted on them, then the period of free vibration of the new system will be

Video Solution

ISRO Scientist or Engineer Mechanical 2011 - Question 45


Dislocations in materials are

Video Solution

ISRO Scientist or Engineer Mechanical 2011 - Question 46


Which of the following thermocouple is capable of measuring highest temperature?

Video Solution

ISRO Scientist or Engineer Mechanical 2011 - Question 47


Acircular rod of 100mm diameter and 500mm length is subjected to a tensile force of 1000KN. Determine the modulus of rigidity (G) if $$E = 2 \times 10^5 N/mm^2$$ and Poisson’s = 0.3

Video Solution

ISRO Scientist or Engineer Mechanical 2011 - Question 48


For the state of stress shown in the above figure, normal stress acting on the plane of maximum shear stress is

Video Solution

ISRO Scientist or Engineer Mechanical 2011 - Question 49


The effective diameter of an external or internal screw thread, is known as

Video Solution

ISRO Scientist or Engineer Mechanical 2011 - Question 50


Consider the following statements:
If at section away from the ends of the beam, M represents the bending moment, $$V$$ the shear force, $$w$$ the intensity of loading and $$y$$ represents the deflection of the beam at the section, then
1.$$\frac{dM}{dx} = V$$
2.$$\frac{dV}{dx} = w$$
3.$$\frac{dw}{dx} = y$$
Of these statements

Video Solution
cracku

Boost your Prep!

Download App