[Download PDF] DMRC Electronics Engineering Paper-1 2016 Paper with Solutions

DMRC Electronics Engineering Paper-1 2016 - Question 1

A car travels first half distance between two places with a speed of 40 km/hr and the rest half distance with a speed of 60 km/hr. The average speed of the car is:

DMRC Electronics Engineering Paper-1 2016 - Question 2

In how many different ways can the letters of the word ‘RIDDLED’ be arranged?

DMRC Electronics Engineering Paper-1 2016 - Question 3

In the following question, a series is given with one term missing. Choose the correct alternative from the given ones that will complete the series.
AGMSY, CIOUA, EKQWC, _____, IOUAG, KQWCI.

DMRC Electronics Engineering Paper-1 2016 - Question 4

A sphere and a cube have equal surface areas. The ratio of the volume of the sphere to that of the cube is:

DMRC Electronics Engineering Paper-1 2016 - Question 5

Which two workers work in the drug industry?

DMRC Electronics Engineering Paper-1 2016 - Question 6

Which two work in the paper industry?

DMRC Electronics Engineering Paper-1 2016 - Question 7

Paper, Drug and Toy are represented by which of the following respectively?

DMRC Electronics Engineering Paper-1 2016 - Question 8

Which of the following occurred first:

DMRC Electronics Engineering Paper-1 2016 - Question 9

Which of the following represents the statement that some of the psychologists are philosophers. Some philosophers are writers. But no psychologist is a writer.

DMRC Electronics Engineering Paper-1 2016 - Question 10

If $$(243)^{\frac{3}{5}} \times (729)^{\frac{-2}{3}} = 3^x$$ then the value of x is.

DMRC Electronics Engineering Paper-1 2016 - Question 11

The velocity of a shell leaving the gun is 300 m/sec. Two shots are fired, first with elevation of barrel at $$30^\circ$$ and second with elevation $$60^\circ$$. The range achieved by the first will be:

DMRC Electronics Engineering Paper-1 2016 - Question 12

Count the number of rectangles in the following figure:

DMRC Electronics Engineering Paper-1 2016 - Question 13

The circumference of a semicircle of area 1925 sq. cm is equal to the breadth of a rectangle. If the length of the rectangle is equal to the perimeter of a square of side 48 cm. What is the perimeter of the rectangle?

DMRC Electronics Engineering Paper-1 2016 - Question 14

A cloth merchant sold half of his cloth at 40% profit, half of remaining at 40% loss and rest was sold at cost price. In total transaction his gain or loss will be?

DMRC Electronics Engineering Paper-1 2016 - Question 15

Khaira disease of paddy is due to soil deficiency of:

DMRC Electronics Engineering Paper-1 2016 - Question 16

“The State shall endeavor to provide early childhood care and education of all children until they complete the age of six years”. This is a provision under:

DMRC Electronics Engineering Paper-1 2016 - Question 17

If INDIA is codified as XYZXE and GLAD is codified PMEZ then LANDING is codified as:

DMRC Electronics Engineering Paper-1 2016 - Question 18

Anil is the son of Bina. Chitra, who is Bina’s sister has a son Deepak and a daughter Ela. Fateh is the maternal uncle of Deepak.
How is Ela related to Fateh:

DMRC Electronics Engineering Paper-1 2016 - Question 19

Find the wrong number in the following series.
10, 14, 28, 32, 64, 68, 132.

DMRC Electronics Engineering Paper-1 2016 - Question 20

Which has become the first airport of the world to fully operate on solar power?

DMRC Electronics Engineering Paper-1 2016 - Question 21

Which one of the following European countries borders Atlantic ocean?

DMRC Electronics Engineering Paper-1 2016 - Question 22

From the following diagram find out correct answer for the given question.

Indians who are actors but not singers:

DMRC Electronics Engineering Paper-1 2016 - Question 23

New Horizons became the first space probe to reach closest to Pluto recently. This is a mission by:

DMRC Electronics Engineering Paper-1 2016 - Question 24

DMRC Electronics Engineering Paper-1 2016 - Question 25

DMRC Electronics Engineering Paper-1 2016 - Question 26

A man and Babu can complete the work in 4 days. Aman alone starts working and leaves it after working for 3 days, completing only half of the work. In how many days, it can be completed if the remaining job is undertaken by Babu:

DMRC Electronics Engineering Paper-1 2016 - Question 27

In three vessels, the ratio of water and milk is 6 : 7, 5 : 9 and 8 : 7 respectively. If the mixtures of the three vessels are mixed then what is the ratio of water and milk?

DMRC Electronics Engineering Paper-1 2016 - Question 28

‘Indian Standard Meridian’ passes through the states of:

DMRC Electronics Engineering Paper-1 2016 - Question 29

If interest payments are subtracted from gross fiscal deficit, the remainder will be:

DMRC Electronics Engineering Paper-1 2016 - Question 30

Who was the famous poet who was deeply affected by Tagore’s Gitanjali?

DMRC Electronics Engineering Paper-1 2016 - Question 31

A person mixes three varieties of wheat costing Rs. 20/- kg, Rs. 24/- kg and Rs. 30/- kg in the ratio of 1:5:2 and sells the mixture at a profit of 20%. Find the selling price of the mixture when it is sold at 33% profit:

DMRC Electronics Engineering Paper-1 2016 - Question 32

Match the trophies associated with the respective games:

DMRC Electronics Engineering Paper-1 2016 - Question 33

A triangle has two of its angles in the ratio of 1:2. If the measure of one of its angles is 30 degrees. What is the measure of the largest angle of the triangle in degree?

DMRC Electronics Engineering Paper-1 2016 - Question 34

The alloy containing copper, tin and zinc in the ratio of 87 : 10 : 3 is called:

DMRC Electronics Engineering Paper-1 2016 - Question 35

Which portion of the heart receives oxygenated blood:

DMRC Electronics Engineering Paper-1 2016 - Question 36

A form of Hindustani music known as ‘Khayal’ evolved during the 13th & 14th centruries. The proponent of the style is known as:

DMRC Electronics Engineering Paper-1 2016 - Question 37

The first Indian to receive Nobel Prize:

DMRC Electronics Engineering Paper-1 2016 - Question 38

When we consider $$15^\circ$$ meridian on a world map or globe and count them in an eastward direction starting with Greenwich meridian ($$0^\circ$$), we find that the time of this meridian is:

DMRC Electronics Engineering Paper-1 2016 - Question 39

Out of a total of 85 children playing Badminton or Table Tennis or both. Total number of girls in the group is 70% of the total number of boys in the group. The number of boys playing only Badminton is 50% of the number of boys and total number of boys playing Badminton is 60% of the total number of boys. Number of children only playing Table Tennis is 40% of the
total number of children and a total of 12 children play Badminton and Table Tennis both. What is the number of girls playing only Badminton?

DMRC Electronics Engineering Paper-1 2016 - Question 40

How many squares can be formed by joining the center of the circles by horizontal and vertical lines:

DMRC Electronics Engineering Paper-1 2016 - Question 41

A cistern has two pipes attached to it, one to supply and one to draw off. If both the pipes are opened together, the cistern is filled in 9 hours but if the waste pipe is opened one hour after the supply pipe, the cistern is filled in 7 hours. The time that will be taken by the supply pipe to fill the empty cistern is:

DMRC Electronics Engineering Paper-1 2016 - Question 42

The first woman in NASA history to command space flight:

DMRC Electronics Engineering Paper-1 2016 - Question 43

In an examination, pass marks are 36% of maximum marks. If an examine gets 17 marks and fails by 10 marks in this examination, what are the maximum marks?

DMRC Electronics Engineering Paper-1 2016 - Question 44

If $$x = \frac{\sqrt{3} - \sqrt{2}}{\sqrt{3} + \sqrt{2}}$$ and $$y = \frac{\sqrt{3} + \sqrt{2}}{\sqrt{3} - \sqrt{2}}$$, then find the value of $$x^2 + xy + y^2$$.

DMRC Electronics Engineering Paper-1 2016 - Question 45

Rhine valley in France is known for mineral deposits of:

DMRC Electronics Engineering Paper-1 2016 - Question 46

An FM signal with modulation index mƒ is passed through a frequency tripler. The modulation index of the output signal will be

DMRC Electronics Engineering Paper-1 2016 - Question 47

What is the correct sequence of the following step in the fabrication of a monolithic, bipolar junction transistor?
1. Emitter diffusion
2. Base diffusion
3. Buried layer formation
4. Epi-layer formation
Select the correct answer using the codes given below

DMRC Electronics Engineering Paper-1 2016 - Question 48

Two sinusoidal signals having the same amplitude and frequency are applied to the X and Y inputs of a CRO. The observed Lissajous figure is straight line. The phase shift between the two signals would be

DMRC Electronics Engineering Paper-1 2016 - Question 49

In a BJT circuit a pnp transistor is replaced by npn transistor. To analyse the new circuit

DMRC Electronics Engineering Paper-1 2016 - Question 50

In 8085 microprocessor, the value of the most significant bit of the result following the execution of any arithmetic of Boolean instruction is stored in the

DMRC Electronics Engineering Paper-1 2016 - Question 51

The analog signal m(t) is given below m(t) = 4 cos 100 pt + 8 sin 200 pt + cos 300 pt, the Nyquist sampling rate will be:

DMRC Electronics Engineering Paper-1 2016 - Question 52

Find the noise factor for an antenna at $$27^\circ$$ C with equivalent noise temperature $$30^\circ$$ K:

DMRC Electronics Engineering Paper-1 2016 - Question 53

Inverse Laplace transform of $$\frac{2s + s}{(s + 3)(S + 2)}$$ is:

DMRC Electronics Engineering Paper-1 2016 - Question 54

The analog signal given below is sampled by 600 samples per second for m(t) = 3 sin 500 pt + 2 sin 700 pt then folding frequency is:

DMRC Electronics Engineering Paper-1 2016 - Question 55

Which one most appropriate dynamic system?

DMRC Electronics Engineering Paper-1 2016 - Question 56

In which of these is reverse recovery time nearly zero?

DMRC Electronics Engineering Paper-1 2016 - Question 57

Frequency shift keying is used mostly in:

DMRC Electronics Engineering Paper-1 2016 - Question 58

A parallel polarized wave is incident from air into paraffin having relative permittivity 3, the value of its Brewster angle is:

DMRC Electronics Engineering Paper-1 2016 - Question 59

The phase angle corresponding to $$\frac{\lambda}{4}$$ in a standing - wave pattern is:

DMRC Electronics Engineering Paper-1 2016 - Question 60

A 10 km long line has a characteristic impedance of 400 ohms. If line length is 100 km, the characteristic impedance is:

DMRC Electronics Engineering Paper-1 2016 - Question 61

The output of an exclusive-NOR gate is 1. Which input combination is correct?

DMRC Electronics Engineering Paper-1 2016 - Question 62

In figure v1 = 8 V and v2 = 4 V. Which diode will conduct?

DMRC Electronics Engineering Paper-1 2016 - Question 63

Determine the output frequency for a frequency division circuit that contains 12 flip-flops with an input clock frequency of 20.48 MHz:

DMRC Electronics Engineering Paper-1 2016 - Question 64

Initially the number decimal 8 is stored. If instruction RAL is executed twice, the final number stored will be:

DMRC Electronics Engineering Paper-1 2016 - Question 65

The output of an AND gate with three inputs, A, B, and C, is HIGH when ________:

DMRC Electronics Engineering Paper-1 2016 - Question 66

The gain of an FET amplifier can be changed by changing:

DMRC Electronics Engineering Paper-1 2016 - Question 67

In the case of a 70-MHz IF carrier for a transponder bandwidth of 36 MHz, energy must lie between MHz:

DMRC Electronics Engineering Paper-1 2016 - Question 68

In a full wave rectifier circuit using centre tapped transformer, the peak voltage across half of the secondary winding is 30 V. Then PIV is:

DMRC Electronics Engineering Paper-1 2016 - Question 69

The Lissajous pattern observed on screen of CRO is a straight line inclined at $$45^\circ$$ to x axis. If X-plate input is 2 sin ωt, the Y-plate input is

DMRC Electronics Engineering Paper-1 2016 - Question 70

The input impedance of op-amp circuit of figure is:

DMRC Electronics Engineering Paper-1 2016 - Question 71

In a CRO which of the following is not a part of electron gun:

DMRC Electronics Engineering Paper-1 2016 - Question 72

A 1 $$\mu F$$ capacitor is connected to 12 V battery. The energy stored in the capacitor is:

DMRC Electronics Engineering Paper-1 2016 - Question 73

For a transmission line open circuit and short circuit impedances are 20 Ω and 5 Ω. Then characteristic impedance is:

DMRC Electronics Engineering Paper-1 2016 - Question 74

Find i(t) if $$I(s) = \frac{s + 1}{(s + 4)(s + 3)}:$$

DMRC Electronics Engineering Paper-1 2016 - Question 75

A capacitor used for power factor correction in single phase circuit decreases:

DMRC Electronics Engineering Paper-1 2016 - Question 76

The negative sign in the expression $$e = - N (d \phi )/dt$$ is due to:

DMRC Electronics Engineering Paper-1 2016 - Question 77

Form factor is the ratio of:

DMRC Electronics Engineering Paper-1 2016 - Question 78

The number of valence electrons in pentavalent impurity is:

DMRC Electronics Engineering Paper-1 2016 - Question 79

Material which lack permanent magnetic dipoles are known as:

DMRC Electronics Engineering Paper-1 2016 - Question 80

The primary function of the bias circuit is to:

DMRC Electronics Engineering Paper-1 2016 - Question 81

The transconductance of a JFET is computed at constant $$V_{DS}$$ by:

DMRC Electronics Engineering Paper-1 2016 - Question 82

To find current in a resistance connected in a network, Thevenin's theorem is used $$V_{TH}$$ = 20 V and $$R_{TH}$$ = 5 Ω. The current through the resistance:

DMRC Electronics Engineering Paper-1 2016 - Question 83

Superposition theorem is not applicable to network containing:

DMRC Electronics Engineering Paper-1 2016 - Question 84

In a microwave test bench, why is the microwave signal amplitude modulated at 1 kHz?

DMRC Electronics Engineering Paper-1 2016 - Question 85

The directive gain of an antenna:

DMRC Electronics Engineering Paper-1 2016 - Question 86

An amplifier without feedback has a voltage gain of 50, input resistance 1 kΩ and output resistance of 2.5 kΩ. The input resistance of the current-shunt negative feedback amplifier using the above amplifier with a feedback factor of 0.2 would be:

DMRC Electronics Engineering Paper-1 2016 - Question 87

In amplitude modulation AM, if modulation index is more than 100% then:

DMRC Electronics Engineering Paper-1 2016 - Question 88

The use of non-uniform quantization leads to:

DMRC Electronics Engineering Paper-1 2016 - Question 89

A PD controller is used to compensate a system. Compared to the uncompensated system, the compensated system has:

DMRC Electronics Engineering Paper-1 2016 - Question 90

Which of the following is an inherent property of an optical signal and cannot be eliminated even in principle?

DMRC Electronics Engineering Paper-1 2016 - Question 91

The disadvantage of CDMA system is:

DMRC Electronics Engineering Paper-1 2016 - Question 92

The Ku frequency band used in satellite communication (for uplink and downlink) is:

DMRC Electronics Engineering Paper-1 2016 - Question 93

Following transducer is an active transducer:

DMRC Electronics Engineering Paper-1 2016 - Question 94

A NOR gate is equivalent to a bubbled AND gate. This statement is an outcome of:

DMRC Electronics Engineering Paper-1 2016 - Question 95

The circuit shown in the figure has initial current $$i_L(0) = 1A$$ through the inductor and an initial voltage $$V_c(0) = 1 V$$ across the capacitor. For input v(t) = U(t) the Laplace transform of the current i(t) for $$t \geq 0$$ is: