[Download PDF] DMRC Electrical Engineering Paper-1 2014 Paper with Solutions

DMRC Electrical Engineering Paper-1 2014 - Question 1

Who became the first Indian to win three medals in successive ISSF shooting world cup held recently?

DMRC Electrical Engineering Paper-1 2014 - Question 2

Recently, the plan to build the world most powerful and largest telescope ‘ATLAST’ to analyse the environment of other planets and to track the existence of aliens life, was unveiled. This is planned by:

DMRC Electrical Engineering Paper-1 2014 - Question 3

Who bagged the FIDE World Rapid Chess Championship title recently held in Dubai?

DMRC Electrical Engineering Paper-1 2014 - Question 4

Who won the world food prize for the year 2014?

DMRC Electrical Engineering Paper-1 2014 - Question 5

India’s first ‘one stop crisis centre’ for women who are victims of violence named ‘Gauravi’ was launched recently by ………… in …………?

DMRC Electrical Engineering Paper-1 2014 - Question 6

The world first electric plane named E-Fan first flight was carried successfully recently in:

DMRC Electrical Engineering Paper-1 2014 - Question 7

Which one of the following plants yield bio diesel or bio fuels?

DMRC Electrical Engineering Paper-1 2014 - Question 8

‘The Argumentative Indian’ is a book written by

DMRC Electrical Engineering Paper-1 2014 - Question 9

Nanda Devi Biosphere Reserve is located in which Indian state?

DMRC Electrical Engineering Paper-1 2014 - Question 10

Which of the following is wrongly matched:

DMRC Electrical Engineering Paper-1 2014 - Question 11

Who has recently won 2014 Pultizer prize in the poetry category:

DMRC Electrical Engineering Paper-1 2014 - Question 12

Clean water would have BOD value of less than:

DMRC Electrical Engineering Paper-1 2014 - Question 13

Indentify the Shakespearea play in which we have a death by poisoning:

DMRC Electrical Engineering Paper-1 2014 - Question 14

Who will have its leader elected as leader of opposition and given the status & facilities to the rank of cabinet ministers?

DMRC Electrical Engineering Paper-1 2014 - Question 15

Which one of the following is most likely to occur if the Reserve bank of India lowers the Cash Reserve Ratio?

DMRC Electrical Engineering Paper-1 2014 - Question 16

The Reports of the comptroller and auditor General of India relating to the accounts of the Union shall be submitted to:

DMRC Electrical Engineering Paper-1 2014 - Question 17

One star is going away from the Earth. Then the observer on the Earth will experience:

DMRC Electrical Engineering Paper-1 2014 - Question 18

Which one of the following seismic wave is the fastest?

DMRC Electrical Engineering Paper-1 2014 - Question 19

Who among the British Generals defeated Peshwa Baji Rao II:

DMRC Electrical Engineering Paper-1 2014 - Question 20

Which one is not written by Munshi Prem Chand:

DMRC Electrical Engineering Paper-1 2014 - Question 21

A B is a tangent to the circle. The radius of the circle is 2 cm. Then the area of the shaded portion is:

DMRC Electrical Engineering Paper-1 2014 - Question 22

Two cylinders have the same volume. The heights are in the ratio of 1 : 2, then the ratio of the radii will be:

DMRC Electrical Engineering Paper-1 2014 - Question 23

If the $$a_{th}$$ a part of 49 is 7 and $$b_{th}$$ b part of 63 is 9 and $$c_{th}$$ c part of 112 is 16. Then which of the following is true:

DMRC Electrical Engineering Paper-1 2014 - Question 24

x% of x is the same as 10% of:

DMRC Electrical Engineering Paper-1 2014 - Question 25

P Q R S T are five boys. Given that P is taller than Q, R is shorter than P, S is taller than T but shorter than Q, the tallest boy is:

DMRC Electrical Engineering Paper-1 2014 - Question 26

Five persons are standing in a queue. One of the two person at the extreme end is a professor and the other is a businessman. An advocate is standing to the right of the student. An author is to the left of the businessman. The student is standing between the professor and the advocate. Counting from the left the author is at which place:

DMRC Electrical Engineering Paper-1 2014 - Question 27

P is standing to the east of Q at a distance of 4 km. P stands still while Q goes north for 4 km. In which direction must Q now look to see P:

DMRC Electrical Engineering Paper-1 2014 - Question 28

If AM = 3, ARE = 4, and NEVER = 8, then “INDIA IS A GREAT NATIN” =:

DMRC Electrical Engineering Paper-1 2014 - Question 29

Complete the following series.
A Z B Z _ A B A _ A _ B _ B A

DMRC Electrical Engineering Paper-1 2014 - Question 30

If one side and one diagonal of a rhombus are 5 cm and 8 cm respectively, then its area (in $$cm^2$$) is:

DMRC Electrical Engineering Paper-1 2014 - Question 31

One acute angle of a right angled triangle is double the other. If the length of its hypotenuse is 10 cm, then its area is :

DMRC Electrical Engineering Paper-1 2014 - Question 32

The average age of the boys in class of 30 boys is 14.5 years. What will be the average age if 10 new boys come whose average is 15.2 years, and joins them?

DMRC Electrical Engineering Paper-1 2014 - Question 33

In a certain code language “PROPORTION” is written as “PORPRONOIT”. How is “CONVERSION” written in that code language?

DMRC Electrical Engineering Paper-1 2014 - Question 34

Three men or eight boys can do a piece of work in 17 days. How many days will two men and six boys together take to finish the same work?

DMRC Electrical Engineering Paper-1 2014 - Question 35

Twelve solid spheres of the same size are made by melting a solid metallic cylinder of base diameter 2 cm and height 16 cm. The diameter of each sphere is :

DMRC Electrical Engineering Paper-1 2014 - Question 36

There are some girls and buffalos at a place. If total number of heads is 15 and total number of legs is 46, then how many girls and how many buffalos are there?

DMRC Electrical Engineering Paper-1 2014 - Question 37

Given two positions of the dice as being.

When 2 is at the bottom which number is at the top:

DMRC Electrical Engineering Paper-1 2014 - Question 38

Simplify : $$2^{65} \times 2^{70} - 2^{97} \times 2^{38}$$

DMRC Electrical Engineering Paper-1 2014 - Question 39

The average of 5 consecutive numbers A, B, C, D and E is 48. What is the product of A and D?

DMRC Electrical Engineering Paper-1 2014 - Question 40

Among five friends - Brijesh, Feroz, Jai, Kamal and Vinod each having a different weight. Feroz is heavier than only Jai. Brijesh is heavier than Feroj and Vinod but not as heavy as Kamal. Who is the third heaviest among them?

DMRC Electrical Engineering Paper-1 2014 - Question 41

Select the suitable alternative to sssscomplete the series.
2401, 49, 7; _, 36, 6:

DMRC Electrical Engineering Paper-1 2014 - Question 42

Which word in that language stands for ‘apple’.

DMRC Electrical Engineering Paper-1 2014 - Question 43

What does ‘Zip’ stand for?

DMRC Electrical Engineering Paper-1 2014 - Question 44

How many times from 4 AM to 4 PM the hands of clock are at right angles?

DMRC Electrical Engineering Paper-1 2014 - Question 45

If in a certain code language ‘BALE’ is written as ‘+ ÷ & ×’ and ‘SKIP’ is written as How is ‘LIFE’ written in that code?

DMRC Electrical Engineering Paper-1 2014 - Question 46

In a three-phase induction motor, the rotor field runs at the following speed with respect to the stator structure:

DMRC Electrical Engineering Paper-1 2014 - Question 47

V/f is maintained constant in the following case of speed control of induction motor:

DMRC Electrical Engineering Paper-1 2014 - Question 48

In a double-cage induction motor, which of the following is not true:

DMRC Electrical Engineering Paper-1 2014 - Question 49

The voltage regulation of a transformer at full load 0.9 p.f. lagging is 5%. For a full load at 0.9 p.f. leading, it will :

DMRC Electrical Engineering Paper-1 2014 - Question 50

For which of the following pair of machines, the stator and its winding can be of the same type:

DMRC Electrical Engineering Paper-1 2014 - Question 51

In which of the following amplifier configurations, the power gain is the largest?

DMRC Electrical Engineering Paper-1 2014 - Question 52

Transformer core is laminated in order to:

DMRC Electrical Engineering Paper-1 2014 - Question 53

For increasing the range of voltmeter, one should connect a:

DMRC Electrical Engineering Paper-1 2014 - Question 54

To conduct Sumpners test on a transformer:

DMRC Electrical Engineering Paper-1 2014 - Question 55

Unit of reactive power is:

DMRC Electrical Engineering Paper-1 2014 - Question 56

Synchronous Generator is a source of:

DMRC Electrical Engineering Paper-1 2014 - Question 57

In an induction motor, if the air gap is increased;

DMRC Electrical Engineering Paper-1 2014 - Question 58

A DC shunt motor is running at 1200 rpm, when excited with 220V dc. Neglecting the losses and saturation, the speed of the motor when connected to a 175 V supply is:

DMRC Electrical Engineering Paper-1 2014 - Question 59

The function of oil in a transformer is to provide:

DMRC Electrical Engineering Paper-1 2014 - Question 60

The ratio of starting torque to running torque in a synchronous motor is:

DMRC Electrical Engineering Paper-1 2014 - Question 61

A Q-meter measures:

DMRC Electrical Engineering Paper-1 2014 - Question 62

The hysteresis Motor:

DMRC Electrical Engineering Paper-1 2014 - Question 63

Counterpoise is used for:

DMRC Electrical Engineering Paper-1 2014 - Question 64

A single-phase ac regulator is used to convert:

DMRC Electrical Engineering Paper-1 2014 - Question 65

In a 3-phase voltage source inverter used for speed control of induction motor, anti-parallel diodes are used across each switching device. The main purpose of diodes is to:

DMRC Electrical Engineering Paper-1 2014 - Question 66

The pressure coil of a wattmeter consists of:

DMRC Electrical Engineering Paper-1 2014 - Question 67

Electrostatic instruments are suitable for the measurement of:

DMRC Electrical Engineering Paper-1 2014 - Question 68

Schering bridge is used to measure.

DMRC Electrical Engineering Paper-1 2014 - Question 69

The ratio error in current transformer is due to:

DMRC Electrical Engineering Paper-1 2014 - Question 70

The major cause for creeping in energymeter is:

DMRC Electrical Engineering Paper-1 2014 - Question 71

A 3-phase synchronous motor, connected to infinite bus, is operating at no load at normal excitation. The field excitation of the motor is first decreased to zero and
then increased in the reverse direction. The armature current of the synchronous motor will:

DMRC Electrical Engineering Paper-1 2014 - Question 72

If a resistance is inserted in the rotor circuit of a slip ring induction motor, then compared to direct line starting:

DMRC Electrical Engineering Paper-1 2014 - Question 73

Starting torque can be obtained in the case of a single phase induction motor with identical main and auxiliary windings by connecting:

DMRC Electrical Engineering Paper-1 2014 - Question 74

Armature shunting method of speed control of dc shunt motor is preferred over armature resistance method due to:

DMRC Electrical Engineering Paper-1 2014 - Question 75

Distribution transformers have core losses;

DMRC Electrical Engineering Paper-1 2014 - Question 76

Hollow conductors are used in the transmission lines to:

DMRC Electrical Engineering Paper-1 2014 - Question 77

In a junction transistor, the doping level of collector region is:

DMRC Electrical Engineering Paper-1 2014 - Question 78

The equivalent resistance of the circuit is:

DMRC Electrical Engineering Paper-1 2014 - Question 79

The purpose of a coupling capacitor in an amplifier is to :

DMRC Electrical Engineering Paper-1 2014 - Question 80

A circuit requires a capacitor of $$100 \mu f$$, 25V. The capacitor can be:

DMRC Electrical Engineering Paper-1 2014 - Question 81

A static memory stores its data in:

DMRC Electrical Engineering Paper-1 2014 - Question 82

Which of the statements about the force between two charge is true?

DMRC Electrical Engineering Paper-1 2014 - Question 83

With the increase in the cross sectional area of the conductor, the value of resistance:

DMRC Electrical Engineering Paper-1 2014 - Question 84

With the increase in the temperature the resistance of copper:

DMRC Electrical Engineering Paper-1 2014 - Question 85

The unit of electric energy is:

DMRC Electrical Engineering Paper-1 2014 - Question 86

In Series LCR circuit, at resonance:

DMRC Electrical Engineering Paper-1 2014 - Question 87

To neglect a current source, the terminal across the sources are:

DMRC Electrical Engineering Paper-1 2014 - Question 88

The generator which gives dc supply to the rotor is called:

DMRC Electrical Engineering Paper-1 2014 - Question 89

The deflection torque can be produced by:

DMRC Electrical Engineering Paper-1 2014 - Question 90

Carbon brushes are used in electric motors to:

DMRC Electrical Engineering Paper-1 2014 - Question 91

LVDT is a:

DMRC Electrical Engineering Paper-1 2014 - Question 92

Base impendence of the power system is given by:

DMRC Electrical Engineering Paper-1 2014 - Question 93

The process of converting a.c. into d.c. is called:

DMRC Electrical Engineering Paper-1 2014 - Question 94

One advantage of transformer coupling in transistor amplifier is that:

DMRC Electrical Engineering Paper-1 2014 - Question 95

A single binary digit is called:

DMRC Electrical Engineering Paper-1 2014 - Question 96

Kelvin is the SI unit of:

DMRC Electrical Engineering Paper-1 2014 - Question 97

Which of the following is a vector quantity:

DMRC Electrical Engineering Paper-1 2014 - Question 98

According to Ohm’s law:

DMRC Electrical Engineering Paper-1 2014 - Question 99

The unit of reluctance is :

DMRC Electrical Engineering Paper-1 2014 - Question 100

The minus sign in the expression, $$e = \frac{-Nd \phi}{dt}$$ is due to:

DMRC Electrical Engineering Paper-1 2014 - Question 101

When $$X_L$$ is equal to $$X_C$$ then:

DMRC Electrical Engineering Paper-1 2014 - Question 102

The following statements associated with Buchholtz relays is not true.

DMRC Electrical Engineering Paper-1 2014 - Question 103

Electrical fault between two windings of same phase of a generator having double star winding can be detected by the following protection in a generator: