Instructions

Read the following scenario and answer the THREE questions that follow.

DeepSea is a natural gas extraction company that retrieves natural gas from rock formations beneath the seabed. This gas is then transported through its extensive pipeline network to a bottling plant, located at the sea surface, for processing. The gas in rock formations is pressurized, enabling it to flow to the surface and reach the bottling plant. Yet, excessive pressure can cause bursts in the pipeline, leading to uncontrolled gas release, known as blowout. A blowout carries a staggering cost, encompassing not only environmental damage but also reputation loss and financial losses totaling crores of rupees. Additionally, the impacted section of the pipeline requires a complete replacement.

Industry safety regulations divide the pipeline network into three levels: Level 3 is the part under the seabed, Level 2 is the part above the seabed but in the deep sea, while Level 1 is near the surface. The safety regulations require multiple blowout preventer valves, from now on simply referred to as valves, to be placed at the three different levels of the pipeline network. The valves are normally kept closed, but when the pressure in any part of the pipeline rises beyond a critical level, nearby valves are opened remotely to release the pressure in a controlled manner to prevent blowout. The number of valves across the pipeline helps localize the pressure release, with a greater number of valves providing a backup mechanism, helping in improving pressure localization in case of a blowout. Given that the valves themselves can occasionally malfunction and not release the pressure when needed, using a higher number of valves ensures that a malfunctioning valve can seek the safety of a nearby functioning valve.

A valve can malfunction in two ways: it may fail to release pressure when needed, as previously mentioned, or it can leak gas during regular operation, resulting in unwanted losses. When a valve malfunctions, it necessitates manual replacement.

In the DeepSea Network, 30% of the valves are located at Level 3, which is the deepest level. The remaining valves are evenly distributed between the top two levels. These valves are critical to ensuring safety and are exclusively supplied by GoValve, a highly specialized manufacturer that holds a monopoly in the country’s market.

Question 49

A startup, SafeValve, has started importing a technologically superior brand of valves from abroad, which boasts a significant reduction in gas leakage. An update to industry safety regulations has come out, which allows a lower number of valves in a pipeline network, if technologically superior valves, similar to those imported by SafeValve, are used for the entire network.

DeepSea is aware that the more the number of valves, the better is DeepSea’s ability to contain blowouts. However, a higher number of valves increases the chance of a leakage. Therefore, DeepSea is contemplating a proposal to reduce the number of valves to almost half, by replacing the existing valves (by GoValve) with the valves sold by SafeValve. A team, tasked with evaluating the proposal, has made some observations, listed below.

Which of the following observations is the MOST helpful in REJECTING the proposal?


Create a FREE account and get:

  • All Quant Formulas and shortcuts PDF
  • 15 XAT previous papers with solutions PDF
  • XAT Trial Classes for FREE

    cracku

    Boost your Prep!

    Download App