SSC JE Mechanical Engineering 25th Jan 2018 Shift-2

Instructions

For the following questions answer them individually

SSC JE Mechanical Engineering 25th Jan 2018 Shift-2 - Question 121


The Young’s modulus and thermal stress developed in a steel rod of diametre 2 cm and length 2 m is 200 GPa and 288 MPa respectively, This experiences heating from temperature $$30^\circ C$$ to $$150^\circ C$$ and the rod has been restricted in its original position. Calculate the value of coefficient of thermal expansion.

Video Solution

SSC JE Mechanical Engineering 25th Jan 2018 Shift-2 - Question 122


The value of normal stressis ............ in the plane of maximum shear stress.

Video Solution

SSC JE Mechanical Engineering 25th Jan 2018 Shift-2 - Question 123


Which of the following column has the formulafor the Euler's buckling load as $$\frac{\pi^2 El}{L^2}$$

Video Solution

SSC JE Mechanical Engineering 25th Jan 2018 Shift-2 - Question 124


If the maximum value of the bending moment in the simply supported beam is 6.75 kNm and the diameter of the beam is 75 mm. Calculate the maximum value of bending stress (MPa).

Video Solution

SSC JE Mechanical Engineering 25th Jan 2018 Shift-2 - Question 125


The value of the principal stress at a point in a plane stressed element is $$\sigma_x = \sigma_y = 500$$MPa. Calaulate the value of normal stress acting (MPa)at the angle of $$45^\circ$$ at X axis.

Video Solution

SSC JE Mechanical Engineering 25th Jan 2018 Shift-2 - Question 126


Choose the CORRECT equation for the acceleration in terms of distance (s) and velocity (v).

Video Solution

SSC JE Mechanical Engineering 25th Jan 2018 Shift-2 - Question 127


Choose the CORRECT graph for the motion of an object moving with the linearly increasing acceleration with respect to time.

Video Solution

SSC JE Mechanical Engineering 25th Jan 2018 Shift-2 - Question 128


The maximum value of bending momentin the simply supported beam with a concentrated load P at its mid span is ...............

Video Solution

SSC JE Mechanical Engineering 25th Jan 2018 Shift-2 - Question 129


The fatigue strength of the metallic material can be increased by which of the following features?

Video Solution

SSC JE Mechanical Engineering 25th Jan 2018 Shift-2 - Question 130


The formula for the extension in the tapered rod of length l and tapered diametre of $$D_1$$, and $$D_2$$, under the axial tensile load is ............

Video Solution
cracku

Boost your Prep!

Download App