SSC JE Mechanical Engineering 25th Jan 2018 Shift-2

Instructions

For the following questions answer them individually

SSC JE Mechanical Engineering 25th Jan 2018 Shift-2 - Question 111


The classification of the toothed wheels is shown according to the position of the axes of the shaft. Choose the type of toothed wheels which doesnot comes under this classification.

Video Solution

SSC JE Mechanical Engineering 25th Jan 2018 Shift-2 - Question 112


If the radius of the pitch circle of the gear profile is 50 mm and the value of addendum is 5 mm. Whatwill be the radius of the addendum circle?

Video Solution

SSC JE Mechanical Engineering 25th Jan 2018 Shift-2 - Question 113


What is the value of the sensitivity of the isochronous governor?

Video Solution

SSC JE Mechanical Engineering 25th Jan 2018 Shift-2 - Question 114


The curve formed by the face and the flank of the tooth is known as ............

Video Solution

SSC JE Mechanical Engineering 25th Jan 2018 Shift-2 - Question 115


The strength equation for the rivet in the single shear is given by ..............

Video Solution

SSC JE Mechanical Engineering 25th Jan 2018 Shift-2 - Question 116


The substance used in the reduction offriction between the two surfacesin the relative motion is known as ..........

Video Solution

SSC JE Mechanical Engineering 25th Jan 2018 Shift-2 - Question 117


Choose the principle which is NOT used in the solution making of the problem relatedto friction.

Video Solution

SSC JE Mechanical Engineering 25th Jan 2018 Shift-2 - Question 118


The term G and @ is also known as ............ and .......... respectively in the torsion equation $$\frac{T}{J} = \frac{\tau}{R} = \frac{G \theta}{L}$$

Video Solution

SSC JE Mechanical Engineering 25th Jan 2018 Shift-2 - Question 119


The value of the coefficient of friction between the box and the surface is 0.20 which prevents the box from sliding. If the box decelerates with ‘a’ (m/s$$^2$$), then calculate the deceleration, if the force applied is ‘ma’.

Video Solution

SSC JE Mechanical Engineering 25th Jan 2018 Shift-2 - Question 120


Calculate the value of shear stress (MPa) in the solid circular shaft of diameter 0.1 m which is subjected to the torque of 10 kNm.

Video Solution
cracku

Boost your Prep!

Download App