SSC JE Civil Engineering 2nd March 2017 Shift-2
For the following questions answer them individually
SSC JE Civil Engineering 2nd March 2017 Shift-2 - Question 21
- If h is the difference in height between end points of a chain of length l the required slope correction is _____
SSC JE Civil Engineering 2nd March 2017 Shift-2 - Question 22
Correction per chain length of 100 links along a slope of $$ \alpha $$ radians is _____
SSC JE Civil Engineering 2nd March 2017 Shift-2 - Question 23
Check lines (or proof lines) in Chain Surveying are essentially required
SSC JE Civil Engineering 2nd March 2017 Shift-2 - Question 24
For taking offsets with an optical square on the right hand side of the chain line it is held _____
SSC JE Civil Engineering 2nd March 2017 Shift-2 - Question 25
The conventional sign shown in the figure below represents a.
SSC JE Civil Engineering 2nd March 2017 Shift-2 - Question 26
In an adjusted level when the bubble is central, the axis of the bubble tube becomes parallel to _____
SSC JE Civil Engineering 2nd March 2017 Shift-2 - Question 27
An internal focusing type surveying telescope may be focused by the movement of _____.
SSC JE Civil Engineering 2nd March 2017 Shift-2 - Question 28
A dumpy level is set up with its eye-piece vertically over a peg A. The height from the top of peg A to the center of the eye-piece is 1.540 m and the reading on peg B is 0.705 m. The level is then setup over B. The height of the eye-piece above peg B is 1.490 m and a reading on A is 2.195 m. The difference in level between A and B is
SSC JE Civil Engineering 2nd March 2017 Shift-2 - Question 29
The constant vertical distance between two adjacent contours is called
SSC JE Civil Engineering 2nd March 2017 Shift-2 - Question 30
The direction of steepest slope on a contour is _____.
