[Download PDF] SSC JE Mechanical Engineering 1st March 2017 Shift-2 Paper with Solutions

SSC JE Mechanical Engineering 1st March 2017 Shift-2 - Question 1

If 'L' is the span of a light suspension bridge, whose, each cable carries total weight (w) and the central dip is 'y', the horizontal pull at each support is _____.

SSC JE Mechanical Engineering 1st March 2017 Shift-2 - Question 2

The vehicle moving on a level circular path will exert pressure such that ........

SSC JE Mechanical Engineering 1st March 2017 Shift-2 - Question 3

Which one of the following laws is not applicable for a simple pendulum?

SSC JE Mechanical Engineering 1st March 2017 Shift-2 - Question 4

In order to double the period of a simple pendulum .................

SSC JE Mechanical Engineering 1st March 2017 Shift-2 - Question 5

A body is vibrating at 10 vibrations/second in Simple Harmonic Motion of 10 cm amplitude. The maximum velocity in cm/sec can be _____.

SSC JE Mechanical Engineering 1st March 2017 Shift-2 - Question 6

The sum of kinetic and potential energy of a falling body ..........

SSC JE Mechanical Engineering 1st March 2017 Shift-2 - Question 7

If two bodies, one light and other heavy, have equal kinetic energy, which one has a greater momentum?

SSC JE Mechanical Engineering 1st March 2017 Shift-2 - Question 8

A bucket of water weighing 10 kg is pulled up from a 20 m deep well by a rope weighing 1 kg/m length, then the work done is _____.

SSC JE Mechanical Engineering 1st March 2017 Shift-2 - Question 9

Which of the following is an example of a body undergoing translational equilibrium?

SSC JE Mechanical Engineering 1st March 2017 Shift-2 - Question 10

A boy is swinging on a swing. If another boy sits along with him without disturbing his motion, then the time period of swing will _____.

SSC JE Mechanical Engineering 1st March 2017 Shift-2 - Question 11

The type of motion when the acceleration is proportional to displacement is called _____.

SSC JE Mechanical Engineering 1st March 2017 Shift-2 - Question 12

The escape velocity of a body on earth _____.

SSC JE Mechanical Engineering 1st March 2017 Shift-2 - Question 13

The velocity of the satellite in an orbit close to earth's surface depends on _____.

SSC JE Mechanical Engineering 1st March 2017 Shift-2 - Question 14

A circular disc rolls down an inclined plane, the fraction of its total energy associated with its rotation is _____.

SSC JE Mechanical Engineering 1st March 2017 Shift-2 - Question 15

An object weighs 60 gm in air, 50 gm in water and 40 gm in oil. Then the specific gravity of the oil will be _____.

SSC JE Mechanical Engineering 1st March 2017 Shift-2 - Question 16

The value of coefficient of velocity compared to coefficient of discharge _____.

SSC JE Mechanical Engineering 1st March 2017 Shift-2 - Question 17

Property of a fluid by which molecules of different kinds of fluids are attracted to each other is called _____.

SSC JE Mechanical Engineering 1st March 2017 Shift-2 - Question 18

The depth of water below the spillway and after hydraulic jump are 1 m and 6 m respectively. The head loss will be _____.

SSC JE Mechanical Engineering 1st March 2017 Shift-2 - Question 19

If no resistance is encountered by displacement, such a substance is known as _____.

SSC JE Mechanical Engineering 1st March 2017 Shift-2 - Question 20

Head loss in turbulent flow in a pipe _____.

SSC JE Mechanical Engineering 1st March 2017 Shift-2 - Question 21

The force exerted by the jet on fixed plate shown in the figure below is equal to :

SSC JE Mechanical Engineering 1st March 2017 Shift-2 - Question 22

A weir system in which the downstream water level of the weir nappe is higher than the crest is called _____.

SSC JE Mechanical Engineering 1st March 2017 Shift-2 - Question 23

For starting an axial flow pump, its delivery valve should be _____.

SSC JE Mechanical Engineering 1st March 2017 Shift-2 - Question 24

Equation of continuity results from the principal of conservation of _____.

SSC JE Mechanical Engineering 1st March 2017 Shift-2 - Question 25

When a piping system is made up primarily of friction head and very little of vertical lift, then pipe characteristics should be _____.

SSC JE Mechanical Engineering 1st March 2017 Shift-2 - Question 26

The hydraulic mean depth for a circular pipe of diameter 'd' running full is equal to _____.

SSC JE Mechanical Engineering 1st March 2017 Shift-2 - Question 27

In a centrifugal pump, the liquid enters the pump from _____.

SSC JE Mechanical Engineering 1st March 2017 Shift-2 - Question 28

Head loss in a flowing fluid is experienced due to _____.
A. friction at surface
B. change of direction
C. change of section of passage
D. obstruction in passage

SSC JE Mechanical Engineering 1st March 2017 Shift-2 - Question 29

High specific speed of turbine implies that it is _____.

SSC JE Mechanical Engineering 1st March 2017 Shift-2 - Question 30

One dimensional flow is _____.

SSC JE Mechanical Engineering 1st March 2017 Shift-2 - Question 31

Specific speed of a turbine depends upon _____.

SSC JE Mechanical Engineering 1st March 2017 Shift-2 - Question 32

If a mouthpiece is running full at the outlet, the vacuum at vena-contracta _____.

SSC JE Mechanical Engineering 1st March 2017 Shift-2 - Question 33

When a fluid flows in concentric circles, it is known as _____.

SSC JE Mechanical Engineering 1st March 2017 Shift-2 - Question 34

Maximum impulse will be developed in hydraulic ram when _____.

SSC JE Mechanical Engineering 1st March 2017 Shift-2 - Question 35

Critical-depth meter is used to measure _____.

SSC JE Mechanical Engineering 1st March 2017 Shift-2 - Question 36

Medium specific speed of a pump implies that it is _____.

SSC JE Mechanical Engineering 1st March 2017 Shift-2 - Question 37

The hydraulic grade line is _____.

SSC JE Mechanical Engineering 1st March 2017 Shift-2 - Question 38

The ratio of depth of bucket for a Pelton wheel to the diameter of jet is of the order of _____.

SSC JE Mechanical Engineering 1st March 2017 Shift-2 - Question 39

The contraction of area for flow through orifice in tank depends on _____.
A. shape of orifice
B. size of orifice
C. head in tank

SSC JE Mechanical Engineering 1st March 2017 Shift-2 - Question 40

The flow at critical depth in an open channel is _____.

SSC JE Mechanical Engineering 1st March 2017 Shift-2 - Question 41

In Kaplan turbine runner, the number of blades is generally of the order _____.

SSC JE Mechanical Engineering 1st March 2017 Shift-2 - Question 42

Air vessels in reciprocating pump are used to _____.

SSC JE Mechanical Engineering 1st March 2017 Shift-2 - Question 43

A hydraulic intensifier normally consists of _____.

SSC JE Mechanical Engineering 1st March 2017 Shift-2 - Question 44

Cavitation is caused by _____.

SSC JE Mechanical Engineering 1st March 2017 Shift-2 - Question 45

Which of the following pumps is used for pumping viscous fluids?

SSC JE Mechanical Engineering 1st March 2017 Shift-2 - Question 46

Steel whose elements are used for the purpose of modifying the mechanical properties of plain carbon steel is called _____.

SSC JE Mechanical Engineering 1st March 2017 Shift-2 - Question 47

Alloy steel containing 36% nickel is called _____.

SSC JE Mechanical Engineering 1st March 2017 Shift-2 - Question 48

Carbon steel is _____.

SSC JE Mechanical Engineering 1st March 2017 Shift-2 - Question 49

Percentage of carbon in steel is _____.

SSC JE Mechanical Engineering 1st March 2017 Shift-2 - Question 50

Hardness of steel depends on _____.

SSC JE Mechanical Engineering 1st March 2017 Shift-2 - Question 51

____ is added to raise the yeild point of low carbon steel.

SSC JE Mechanical Engineering 1st March 2017 Shift-2 - Question 52

An alloy steel contains _____.

SSC JE Mechanical Engineering 1st March 2017 Shift-2 - Question 53

Alloy steel as compared to carbon steel is more _____.
A. tough
B. b
C. fatigue resistance

SSC JE Mechanical Engineering 1st March 2017 Shift-2 - Question 54

Steel which destroys by burning is called _____.

SSC JE Mechanical Engineering 1st March 2017 Shift-2 - Question 55

In steel, main alloy causing corrosion resistance is _____.

SSC JE Mechanical Engineering 1st March 2017 Shift-2 - Question 56

The crest diameter of a screw thread is same as _____.

SSC JE Mechanical Engineering 1st March 2017 Shift-2 - Question 57

The function of a washer is to _____.

SSC JE Mechanical Engineering 1st March 2017 Shift-2 - Question 58

The rivet head for general purpose shown in the figure below is:

SSC JE Mechanical Engineering 1st March 2017 Shift-2 - Question 59

The key shown in the figure below is:

SSC JE Mechanical Engineering 1st March 2017 Shift-2 - Question 60

Fibrous fracture occurs in _____.

SSC JE Mechanical Engineering 1st March 2017 Shift-2 - Question 61

For tight leakage joints, following type of thread is best suited _____.

SSC JE Mechanical Engineering 1st March 2017 Shift-2 - Question 62

A backing ring is used inside the pipe joint when making a _____.

SSC JE Mechanical Engineering 1st March 2017 Shift-2 - Question 63

Which of the following pipe joints would be suitable for pipes carrying steam?

SSC JE Mechanical Engineering 1st March 2017 Shift-2 - Question 64

Antifriction bearings are:-
A. Sleeve bearings
B. Hydrodynamic bearings
C.Thin lubricated bearings
D. Ball and roller bearings

SSC JE Mechanical Engineering 1st March 2017 Shift-2 - Question 65

In V-belt drive, belt touches _____.

SSC JE Mechanical Engineering 1st March 2017 Shift-2 - Question 66

In standard taper roller bearings, the angle of taper of outer raceway is _____.

SSC JE Mechanical Engineering 1st March 2017 Shift-2 - Question 67

Basic shaft is one _____.

SSC JE Mechanical Engineering 1st March 2017 Shift-2 - Question 68

Allen bolts are _____.

SSC JE Mechanical Engineering 1st March 2017 Shift-2 - Question 69

If the tearing efficiency of a riveted joint is 60%, then ratio of rivet hole diameter to the pitch of rivets is _____.

SSC JE Mechanical Engineering 1st March 2017 Shift-2 - Question 70

A riveted joint may fail due to:-
A. Shearing of the rivet
B. Shearing off the plate at an edge
C. Crushing of the rivet

SSC JE Mechanical Engineering 1st March 2017 Shift-2 - Question 71

The same volume of all gases would represent their _____.

SSC JE Mechanical Engineering 1st March 2017 Shift-2 - Question 72

Extensive property of a system is one whose value _____.

SSC JE Mechanical Engineering 1st March 2017 Shift-2 - Question 73

In an isothermal process, the internal energy of gas molecules _____.

SSC JE Mechanical Engineering 1st March 2017 Shift-2 - Question 74

The more effective way of increasing efficiency of Carnot engine is to _____.

SSC JE Mechanical Engineering 1st March 2017 Shift-2 - Question 75

Under ideal conditions, isothermal, isobaric, isochoric and adiabatic processes are _____.

SSC JE Mechanical Engineering 1st March 2017 Shift-2 - Question 76

Total heat of a substance is also known as _____.

SSC JE Mechanical Engineering 1st March 2017 Shift-2 - Question 77

In a Carnot cycle, heat is transferred at _____.

SSC JE Mechanical Engineering 1st March 2017 Shift-2 - Question 78

Change of entropy depends upon _____.

SSC JE Mechanical Engineering 1st March 2017 Shift-2 - Question 79

Compressed air coming out from a punctured football _____.

SSC JE Mechanical Engineering 1st March 2017 Shift-2 - Question 80

The ratio of actual cycle efficiency to that of ideal cycle efficiency is called _____.

SSC JE Mechanical Engineering 1st March 2017 Shift-2 - Question 81

Which of the following cycles is not a reversible cycle?
A. Carnot
B. Ericsson
C. Stirling
D. Joule

SSC JE Mechanical Engineering 1st March 2017 Shift-2 - Question 82

A system will be thermodynamic equilibrium only if it is in _____.
A. Thermal equilibrium
B. Mechanical equilibrium
C. Chemical equilibrium

SSC JE Mechanical Engineering 1st March 2017 Shift-2 - Question 83

Two gases A and B with their molecular weights 28 and 44 respectivelly, expand at constant pressures through the same temperature range. The ratio of quantity of work done by the two gases (A : B) is _____.

SSC JE Mechanical Engineering 1st March 2017 Shift-2 - Question 84

Davis steering gear consists of _____.

SSC JE Mechanical Engineering 1st March 2017 Shift-2 - Question 85

Properties of substances like pressure, temperature and density, in thermodynamic co-ordinates are _____.

SSC JE Mechanical Engineering 1st March 2017 Shift-2 - Question 86

The refrigeration plants are charged by refrigerants from the cylinder at the _____.

SSC JE Mechanical Engineering 1st March 2017 Shift-2 - Question 87

Which of the following refrigerant characteristics change constantly during the cooling cycle?

SSC JE Mechanical Engineering 1st March 2017 Shift-2 - Question 88

Moisture in a refrigerant system is removed by _____.
A. Driers
B. Filter driers
C. Desiccants

SSC JE Mechanical Engineering 1st March 2017 Shift-2 - Question 89

The most suitable refrigerant for a commercial ice plant is _____.

SSC JE Mechanical Engineering 1st March 2017 Shift-2 - Question 90

Fittings in ammonia absorption refrigeration system are made of _____.

SSC JE Mechanical Engineering 1st March 2017 Shift-2 - Question 91

Lithium bromide in vapour absorption refrigeration system is used as _____.

SSC JE Mechanical Engineering 1st March 2017 Shift-2 - Question 92

The condenser and evaporator tubes in a Freon refrigeration plant are made of _____.

SSC JE Mechanical Engineering 1st March 2017 Shift-2 - Question 93

Vertical lines on pressure-enthalpy chart show constant _____.

SSC JE Mechanical Engineering 1st March 2017 Shift-2 - Question 94

The coefficient of performance is the ratio of the refrigerant effect to the _____.
A. Heat of compression
B. Work done by compressor
C. Enthalpy increase in compressor

SSC JE Mechanical Engineering 1st March 2017 Shift-2 - Question 95

Moisture in Freon refrigeration system causes _____.

SSC JE Mechanical Engineering 1st March 2017 Shift-2 - Question 96

Efficiency of the Carnot engine is given as 80%. If the cycle direction be reversed, what will be the value of coefficient of performance of reversed Carnot cycle?

SSC JE Mechanical Engineering 1st March 2017 Shift-2 - Question 97

During the sensible cooling process _____.

SSC JE Mechanical Engineering 1st March 2017 Shift-2 - Question 98

On psychrometric chart, wet bulb temperature lines are _____.

SSC JE Mechanical Engineering 1st March 2017 Shift-2 - Question 99

If air is heated without changing its moisture content, the dew point will _____.

SSC JE Mechanical Engineering 1st March 2017 Shift-2 - Question 100

Air is normally dehumidified by _____.

SSC JE Mechanical Engineering 1st March 2017 Shift-2 - Question 101

Select the related word/letters/number from the given alternatives.
Quarter : Half : : Single : ?

SSC JE Mechanical Engineering 1st March 2017 Shift-2 - Question 102

Select the related word/letters/number from the given alternatives.
Ball : Sun : : Cigarette : ?

SSC JE Mechanical Engineering 1st March 2017 Shift-2 - Question 103

Select the related word/letters/number from the given alternatives.
Allot : A lot : : ?

SSC JE Mechanical Engineering 1st March 2017 Shift-2 - Question 104

Select the related word/letters/number from the given alternatives.
HFDB : GEC : : YWUS : ?

SSC JE Mechanical Engineering 1st March 2017 Shift-2 - Question 105

Select the related word/letters/number from the given alternatives.
Grace : Career : : Sitar : ?

SSC JE Mechanical Engineering 1st March 2017 Shift-2 - Question 106

Select the related word/letters/number from the given alternatives.
Destine : Inertia : : Bison : ?

SSC JE Mechanical Engineering 1st March 2017 Shift-2 - Question 107

Select the related word/letters/number from the given alternatives.
99 : 18 : : 77 : ?

SSC JE Mechanical Engineering 1st March 2017 Shift-2 - Question 108

Select the related word/letters/number from the given alternatives.
586 : 364 : : 824 : ?

SSC JE Mechanical Engineering 1st March 2017 Shift-2 - Question 109

Select the related word/letters/number from the given alternatives.
224 : 112 : : 326 : ?

SSC JE Mechanical Engineering 1st March 2017 Shift-2 - Question 110

SSC JE Mechanical Engineering 1st March 2017 Shift-2 - Question 111

SSC JE Mechanical Engineering 1st March 2017 Shift-2 - Question 112

SSC JE Mechanical Engineering 1st March 2017 Shift-2 - Question 113

SSC JE Mechanical Engineering 1st March 2017 Shift-2 - Question 114

SSC JE Mechanical Engineering 1st March 2017 Shift-2 - Question 115

SSC JE Mechanical Engineering 1st March 2017 Shift-2 - Question 116

SSC JE Mechanical Engineering 1st March 2017 Shift-2 - Question 117

SSC JE Mechanical Engineering 1st March 2017 Shift-2 - Question 118

SSC JE Mechanical Engineering 1st March 2017 Shift-2 - Question 119

DDRFTG, CVVBHT, DCEERT, DCFRRT, ?

SSC JE Mechanical Engineering 1st March 2017 Shift-2 - Question 120

Super, Erratic, Icebox, Oxen, ?

SSC JE Mechanical Engineering 1st March 2017 Shift-2 - Question 121

run, anon, clasp, rotted, ?

SSC JE Mechanical Engineering 1st March 2017 Shift-2 - Question 122

Y, U, Q, M, ?

SSC JE Mechanical Engineering 1st March 2017 Shift-2 - Question 123

kpu, jot, ins, hmr, ?

SSC JE Mechanical Engineering 1st March 2017 Shift-2 - Question 124

XXXXOXO, XXXOXOX, XXOXOXX, XOXOXXX, ?

SSC JE Mechanical Engineering 1st March 2017 Shift-2 - Question 125

-7, -3, ?, 8, 15

SSC JE Mechanical Engineering 1st March 2017 Shift-2 - Question 126

2, 1.25, ?, $$\frac{-1}{4}$$, -1

SSC JE Mechanical Engineering 1st March 2017 Shift-2 - Question 127

13, ?, 19, 23, 29

SSC JE Mechanical Engineering 1st March 2017 Shift-2 - Question 128

If m > l, m < n and n < o, which of the following must be true?
I. l < o
II. n > l

SSC JE Mechanical Engineering 1st March 2017 Shift-2 - Question 129

The weights of five boxes are 20, 30, 40, 70 & 90 kilograms. Which of the following cannot be the total weight, in kilograms, of any combination of these boxes?

SSC JE Mechanical Engineering 1st March 2017 Shift-2 - Question 130

If the letters E, D, X, S, P & O are numbered 1, 2, 3, 4, 5 & 6 respectively. Select that combination of numbers so that letters arranged accordingly, form a meaningful word.

SSC JE Mechanical Engineering 1st March 2017 Shift-2 - Question 131

If DISCERNS is coded as WRHXVIMH, then how will AGO be coded as?

SSC JE Mechanical Engineering 1st March 2017 Shift-2 - Question 132

In a certain code language, 639 means 'wood is hard', 657 means 'fur is soft', 135 means 'hard or soft'. Find the code for 'or'.

SSC JE Mechanical Engineering 1st March 2017 Shift-2 - Question 133

In a certain code language, '+' represents '$$\times$$', '-' represents '+', '$$\times$$' represents '$$\div$$' and '$$\div$$' represents '-'. Find out the answer to the following question.
$$0.0625 + 800 - 234 \times 6 = ?$$

SSC JE Mechanical Engineering 1st March 2017 Shift-2 - Question 134

If A @ B means A is father of B, A # B means A is brother of B and A ! B means A is son of B, then what does L # M @ N ! O mean?

SSC JE Mechanical Engineering 1st March 2017 Shift-2 - Question 135

If 62#51 = 0, 82#54 = 5 then find the value of 72#66 = ?

SSC JE Mechanical Engineering 1st March 2017 Shift-2 - Question 136

Which of the following words follows the trend of the given list?
Visual, Avarice, Savour, Salvage, Saliva, ?

SSC JE Mechanical Engineering 1st March 2017 Shift-2 - Question 137

Which of the following terms follow the trend of the given list?
FEEFEE, EFEEFE, EEFEEF, ?

SSC JE Mechanical Engineering 1st March 2017 Shift-2 - Question 138

A postman cycles 4 km West, then turns South and cycles 7 km, then turns East and cycles 4 km, then turns to his left and cycles 10 km. Where is he now with reference to his starting position?

SSC JE Mechanical Engineering 1st March 2017 Shift-2 - Question 139

Two persons A and B start from the same point. A walks 4 m North, then turns to his right and walks 3 m. At the same time, B has walked 9 m East , then he turned to his left and walked 4 m. Where is B now with respect to the position of A?

SSC JE Mechanical Engineering 1st March 2017 Shift-2 - Question 140

In the question two statements are given, followed by two conclusions, I and II. You have to consider the statements to be true even if it seems to be at variance from commonly known facts. You have to decide which of the given conclusions, if any, follows from the given statements.
Statement 1 : Some villagers are poor.
Statement 2 : All poor are nice people.

Conclusion I: Some nice people are villagers.
Conclusion II: No villagers are nice people.

SSC JE Mechanical Engineering 1st March 2017 Shift-2 - Question 141

In the question a statement is given, followed by two arguments, I and II. You have to consider the statement to be true even if it seems to be at variance from commonly known facts. You have to decide which of the given arguments, if any, is a strong argument.

Statement : Should local train tickets be subsidized?

Argument I : No, In an environment where locals trains are overcrowded, subsidy will worsen the situation.
Argument II : Yes, Local trains reduce number of vehicles on the road, thus reducing pollution, reduce costs and travel time.

SSC JE Mechanical Engineering 1st March 2017 Shift-2 - Question 142

Which of the following cube in the answer figure cannot be made based on the unfolded cube in the question figure?

SSC JE Mechanical Engineering 1st March 2017 Shift-2 - Question 143

Which of the following answer figure patterns can be combined to make the question figure?

SSC JE Mechanical Engineering 1st March 2017 Shift-2 - Question 144

Which of the following diagrams represents the relationship between
Chinese, Indians and Asians ?

SSC JE Mechanical Engineering 1st March 2017 Shift-2 - Question 145

In the following figure, square represents hockey players, triangle represents cricket players, circle represents kabaddi players and rectangle represents football players. Which set of letters represents hockey players who do not play football and cricket players who play kabaddi?

SSC JE Mechanical Engineering 1st March 2017 Shift-2 - Question 146

Which answer figure will complete the pattern in the question figure?

SSC JE Mechanical Engineering 1st March 2017 Shift-2 - Question 147

From the given answer figures, select the one in which the question figure is hidden/embedded.

SSC JE Mechanical Engineering 1st March 2017 Shift-2 - Question 148

A piece of paper is folded and punched as shown below in the question figures. From the given answer figures, indicate how it will appear when opened.

SSC JE Mechanical Engineering 1st March 2017 Shift-2 - Question 149

If a mirror is placed on the line MN, then which of the answer figures is the right image of the given figure?

SSC JE Mechanical Engineering 1st March 2017 Shift-2 - Question 150

A word rs represented by only one set of numbers as given in any one of the alternatives. The sets of numbers yen in the alternatives are represented by two classes of alphabets as shown in the given two matrices. The columns and rows of Matrix-I are numbered from 0 to 4 and that of Matrix-II are numbered from 5 to 9. A letter from these matrices can be represented best by its row and next by its column, for example 'Z' can be represented by 20, 23 etc and 'A' can be represented by 65, 57 etc. Similarly, you have to identify the set for the word 'TOWER'.

SSC JE Mechanical Engineering 1st March 2017 Shift-2 - Question 151

The ____________ set is the collection of all bundles that the consumers can buy with their income at the prevailing market prices.

SSC JE Mechanical Engineering 1st March 2017 Shift-2 - Question 152

Economists define unemployed person as one who is not able to get even 1 hour of work in __________.

SSC JE Mechanical Engineering 1st March 2017 Shift-2 - Question 153

If C = Consumption, I = Investment, G = Government spending, Ex = exports & Im = Imports, then GDP =

SSC JE Mechanical Engineering 1st March 2017 Shift-2 - Question 154

Price of an article decreases from Rs 40 to Rs 30 when quantity demanded increases from 1000 units to Q2 units. If point elasticity of demand is -0.8, then what is the value of Q2?

SSC JE Mechanical Engineering 1st March 2017 Shift-2 - Question 155

Monotonicity of preferences implies that the indifference curve is ___________ sloping.

SSC JE Mechanical Engineering 1st March 2017 Shift-2 - Question 156

Which of the following writs is issued when the court finds that a particular office holder is not doing legal duty and thereby is infringing on the rights of an individual?

SSC JE Mechanical Engineering 1st March 2017 Shift-2 - Question 157

A few days before Independence, the Maharaja of _____________, Bodhachandra Singh, signed the Instrument of Accession with the Indian government.

SSC JE Mechanical Engineering 1st March 2017 Shift-2 - Question 158

In the Indian Constitution, the idea of Residual Powers has been borrowed from the _______________ Constitution.

SSC JE Mechanical Engineering 1st March 2017 Shift-2 - Question 159

Article 42 of the Indian Constitution "Provision for justice and humane conditions of work and maternity relief" deals with?

SSC JE Mechanical Engineering 1st March 2017 Shift-2 - Question 160

Which commission suggested that jobs in the Central Government should be reserved for the 'Other Backward Classes' (OBC)?

SSC JE Mechanical Engineering 1st March 2017 Shift-2 - Question 161

With reference to the 1857 revolt consider the following statements.
1. The sepoys of Meerut appealed to Bahadur Shah Zafar to accept the leadership of the revolt.
2. In Kanpur, the sepoys made Nana Sahib as their leader.
3. In Awadh, Rani Laxmibai was made the leader.
Which of the given statements is/are correct?

SSC JE Mechanical Engineering 1st March 2017 Shift-2 - Question 162

One of the most important descriptions of the city of __________________ in the fifteenth century comes from Abdur Razzaq Samarqandi.

SSC JE Mechanical Engineering 1st March 2017 Shift-2 - Question 163

Charles Cornwallis was the Governor General of ________ when the Permanent Settlement was introduced there in 1793.

SSC JE Mechanical Engineering 1st March 2017 Shift-2 - Question 164

The French Revolution, a period that brought far-reaching social and political upheaval in France, began in _________.

SSC JE Mechanical Engineering 1st March 2017 Shift-2 - Question 165

When did the epidemic of Black Death (a type of Plague) spread in entire Europe?

SSC JE Mechanical Engineering 1st March 2017 Shift-2 - Question 166

With reference to an earthquake consider the following statements.
1. The point where the energy of an earthquake is released is called the hypocentre.
2. The point on the surface, nearest to the focus of the earthquake, is called epicentre.
3. Epicentre is a point directly below the focus of an earthquake.
Which of the statements given above is / are corrrect?

SSC JE Mechanical Engineering 1st March 2017 Shift-2 - Question 167

Which of the following places in India has off shore petroleum reserves?

SSC JE Mechanical Engineering 1st March 2017 Shift-2 - Question 168

The earth's radius is approximately ___________.

SSC JE Mechanical Engineering 1st March 2017 Shift-2 - Question 169

Which of the following indian rivers discharges its waters in the Arabian Sea?

SSC JE Mechanical Engineering 1st March 2017 Shift-2 - Question 170

The Khardung La pass is associated with which mountain range?

SSC JE Mechanical Engineering 1st March 2017 Shift-2 - Question 171

Which of the following has a Fusiform root?

SSC JE Mechanical Engineering 1st March 2017 Shift-2 - Question 172

Double fertilization is a complex fertilization mechanism of ____________.

SSC JE Mechanical Engineering 1st March 2017 Shift-2 - Question 173

The nuclear membrane is absent in the cells of organisms belonging to which kingdom?

SSC JE Mechanical Engineering 1st March 2017 Shift-2 - Question 174

____________ are composed of long, fibrous proteins as filaments that slide past each other when a muscle contracts or relaxes.

SSC JE Mechanical Engineering 1st March 2017 Shift-2 - Question 175

Which of the following is the first stage of mitosis?

SSC JE Mechanical Engineering 1st March 2017 Shift-2 - Question 176

The scientific and objective study of animal behaviour is called ______________.

SSC JE Mechanical Engineering 1st March 2017 Shift-2 - Question 177

Read the pairs given below -
Size of Object or distance : Length (in m)

1. Size of a proton : 10-15
2. Length of a typical virus : 10-8
3. Distance of Sun from Earth : 105
4. Thickness of a paper : 10-1

Which of the above pairs are correctly matched?

SSC JE Mechanical Engineering 1st March 2017 Shift-2 - Question 178

Which of the following is the correct formula for magnification while using a concave mirror?

SSC JE Mechanical Engineering 1st March 2017 Shift-2 - Question 179

A thermodynamic process during which the volume of the closed system in consideration remains constant is called ____________.

SSC JE Mechanical Engineering 1st March 2017 Shift-2 - Question 180

Which of the following is the correct order of electromagnetic radiation arranged in order of increasing frequency?

SSC JE Mechanical Engineering 1st March 2017 Shift-2 - Question 181

Which of the following is, "A device used to connect two separate Ethernet networks into one extended Ethernet."?

SSC JE Mechanical Engineering 1st March 2017 Shift-2 - Question 182

________________ is a language for the specification of procedures for the retrieval (and sometimes also modification) of information from a database.

SSC JE Mechanical Engineering 1st March 2017 Shift-2 - Question 183

Read the pairs given below -
Name : Formula
1. Acetone : $$CH_2OHCHOHCH_2OH$$
2. Ethanal : $$CH_3CHO$$
3. Formaldehyde : $$HCHO$$
4. Glycerol : $$CH_3COCH_3$$

Which of the above pairs are correctly matched?