SSC JE Electrical Engineering 25th May 2014 Shift-1
For the following questions answer them individually
SSC JE Electrical Engineering 25th May 2014 Shift-1 - Question 191
Consider a constant uniform magnetic field. A conductor moves across this field at a constant velocity. The emf induced in the conductor is termed as
SSC JE Electrical Engineering 25th May 2014 Shift-1 - Question 192
A generating station supplies the following loads 15000 kW, 12000 kW, 8500 kW, 6000 kW and 450 kW. The station has maximum demand of 22000 kW. Calculate the diversity factor
SSC JE Electrical Engineering 25th May 2014 Shift-1 - Question 193
A magnetic circuit carries a flux $$\phi_i$$, in the iron part and a flux $$\phi_g$$ in the air gap. Then leakage coefficient is
SSC JE Electrical Engineering 25th May 2014 Shift-1 - Question 194
The maximum demand of a consumer is 2kW and his daily energy consumption is 20 units. Load factor is
SSC JE Electrical Engineering 25th May 2014 Shift-1 - Question 195
A wheat stone bridge has ratio arm of 1000 Ω and 100 Ω resistances, the standard resistance arm consists of 4 decade resistance boxes of 1000, 100, 10, 1 Ω steps. The maximum and minimum value of unknown resistance that can be determined with this setup are
SSC JE Electrical Engineering 25th May 2014 Shift-1 - Question 196
Thevenin’s equivalent voltage and resistance between the terminal A and B for network of given figure is
SSC JE Electrical Engineering 25th May 2014 Shift-1 - Question 197
Low frequency operation of AC series motor in traction application
SSC JE Electrical Engineering 25th May 2014 Shift-1 - Question 198
The speed of a p-pole synchronous machine in rpm is given by
SSC JE Electrical Engineering 25th May 2014 Shift-1 - Question 199
Which of the following motor has high starting torque?
SSC JE Electrical Engineering 25th May 2014 Shift-1 - Question 200
What is the order of minimum displacement that can be measured with capacitive transducers
