SSC JE Mechanical Engineering 29th Jan 2018 Shift-2
For the following questions answer them individually
SSC JE Mechanical Engineering 29th Jan 2018 Shift-2 - Question 101
Which of the following is NOT used for determining the velocity of a point on a link?
SSC JE Mechanical Engineering 29th Jan 2018 Shift-2 - Question 102
If link 1 moves with angular velocity $$\omega_1$$ and the second link moves with $$\omega_2$$ in the same direction. Which is the correct equation for rubbing velocity at a pin joint whose radius is r ?
SSC JE Mechanical Engineering 29th Jan 2018 Shift-2 - Question 103
In the given kutzback equation $$F - [3(l - 1) - 2j - h] - F_{r}$$, what does the term $$F_{r}$$ denotes ?
SSC JE Mechanical Engineering 29th Jan 2018 Shift-2 - Question 104
Which of the following option is TRUE for a crank rocker mechanism?
SSC JE Mechanical Engineering 29th Jan 2018 Shift-2 - Question 105
If the coefficient of the fluctuation of speed is 0.04, then calculate the ratio of $$\frac{\omega_{max}}{\omega_{min}}$$
SSC JE Mechanical Engineering 29th Jan 2018 Shift-2 - Question 106
If the angle of contact is 3.06 rad and the coefficient of friction between the smaller pulley surface and belt is 0.5. Calculate the tension (in N) in the slack side, if the tension in the tight side is 1200 N.
SSC JE Mechanical Engineering 29th Jan 2018 Shift-2 - Question 107
Which of the following statement is CORRECT about the rotary internal combustion engine?
SSC JE Mechanical Engineering 29th Jan 2018 Shift-2 - Question 108
What is the possible minimum number of links required in the planar mechanism of single degree of freedom which have both higher and lower kinetic pairs?
SSC JE Mechanical Engineering 29th Jan 2018 Shift-2 - Question 109
The torque transmitting capacity of the single plate clutch is calculated by__________
SSC JE Mechanical Engineering 29th Jan 2018 Shift-2 - Question 110
Choose the correct option in which the Babbit bearing is used?
