SSC JE Mechanical Engineering 27th Jan 2018 Shift-1

For the following questions answer them individually

A man walks 2 km North from his home to reach a bus stop. He catches a bus from there which goes 13 km East, then the bus turns right and goes a further 20 km. Here he gets down and hires a taxi. This taxi travels 5 km West, then travels 3 km South then it turns to its right and travels 8 km to reach the man's office. Where is the man's office with respect to his home?

Two ships start from the same port. Ship A sails 45 miles East, the it turns right and sails 60 miles. In the meanwhile Ship B sails 125 miles South, then it turns left and sails 45 miles, then it turns South and sails 15 miles. Where is Ship A with respect to Ship B?

In the question two statements are given, followed by two conclusions, I and II. You have to consider the statements to be true even if it seems to be at variance from commonly known facts. You have to decide which of the given conclusions, if any, follows from the given statements.
Statement I:
Some virus are living
Statement II:
No living are germs

Conclusion I: Some germs are virus
Conclusion II:
All virus are germs

In the question three statements are given, followed by three conclusions, I, II and III. You have to consider the statements to be true even if it seems to be at variance from commonly known facts. You have to decide which of the given conclusions, if any, follows from the given statements.
Statement I:
Some mortar are cannons
Statement II:
All mortars and cannons are guns
Statement III:
Some mortar which are not cannons are rifles.

Conclusion I: Some guns are rifles
Conclusion II:
Some rifles are cannons
Conclusion III:
Some cannons are guns

A word is represented by only one set of numbers as given in any one of the alternatives. The sets of numbers given in the alternatives are represented by two classes of alphabets as shown in the given two matrices. The columns and rows of Matrix-I are numbered from 0 to 4 and that of Matrix-II are numbered from 5 to 9. A letter from these matrices can be represented first by its row and next by its column, for example 'A' can be represented by 34, 12 etc and 'X' can be represented by 89, 97 etc. Similarly, you have to identify the set for the word 'WHEY'.

Which of the following has been signed between India and Spain in May 2017?

Which of the following statement is INCORRECT?

Which of the following is grazing food chain?

The angular acceleration and the moment of inertia of the flywheel is 0.6 $$\frac{rad}{s^{2}}$$ and 2500 $$kg-m^{2}$$ respectively. What is the difference in kinetic energy (in
kN.-m) of the flywheel after 5 seconds and 10 seconds from the start?

The tension of the tight side and the slack side of belt is $$(T_{1}) and (T_{2}) $$ respectively, with the linear velocity (V). Which expression is most suited for the
maximum power transmitted by the belt?

The equation for the calculation of torque transmitting capacity in the conical clutch as per uniform pressure theory is ________.

Which of the following statement is INCORRECT about the contact ratio?

Choose the CORRECT option for the buckling load in a column to have the maximum value

The thin walled cylindrical vessel has the wall thickness t and diameter d and is subjected to the gauge pressure of P. If the diameter of the vessel is made half of its initial value, then what is the ratio of final hoop stress as compared to the initial value?

A power transmission shaft of diameter d rotating at the speed of N rpm. The speed N is related to diameter d and P as ________.

The work and heat transfer per degree of temperature change for a closed system is given by $$\frac{dW}{dT} = \frac{1}{20}  kJ/^\circ C ; \frac{dW}{dT} = \frac{1}{10} kJ/^\circ C$$; what is the change in internal temperature (in KJ ) as the temperature increases from $$160^\circ  to  350^\circ$$ C ?

An inventor states that the new engine he invented rejects 30% of the heat it absorbs from the reservoir, while the temperature of the source and the sink are maintained at 500 K and 200 K respectively. His engine is equivalent to ________.

In an air standard Diesel cycle, p is the fuel-cut off ratio and y is the adiabatic index and r is the compression ratio. What is the air standard efficiency of the cycle?

A refrigeration plant operates in reverse Carnot engine. The temperature is maintained at $$-10^\circ$$ C and the heat is transferred at the rate of 10 kW. The heat is transferred from the cycle to atmosphere at a temperature of $$25^\circ$$ C. What is the power (in kW) required to drive the plant?

Air at 1 bar and $$40^\circ C$$ flows into an evacuated tank until the pressure in the tank is 1 bar. Assume that the process is adiabatic and the temperature of the surroundings is $$40^\circ C$$. What is the final temperature of air (in $$^\circ C$$)?

Which is an INCORRECT assumption for an Otto cycle?

Pick up the correct statement

In a short cylindrical external mouthpiece, the vena-contracta occurs at a place which is at a distance equal to

The horizontal component of force on a curved surface is equal to the

The discharge over a shape edge triangular notch having included angle of 2\theta and the depth of h is given by formula

The equivalent evaporation of a boiler is a measure to compare

Pick up the correct statement as regards to Cornish boiler and Lancashire boiler

Fuel consumption of diesel engines is not guaranteed at one quarter load because at such low loads

Join CAT 2026 course by 5-Time CAT 100%iler

Crack CAT 2026 & Other Exams with Cracku!